- ページ 18

ポータブルラジオ Motorola JT-1000 - SERVICEのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola JT-1000 - SERVICE 42 ページ。 Motorola jt 1000 portable radio

ページを印刷する

LED, green

LED, red

Radio Operation

with Features (cont.)

Channel Scan

Programming "Operator-Selectable

Channel Scan"

Enter the scan programming mode in

one of two ways, programmed by Radio

Service Software:

• by placing the 3-position toggle switch

in the scan program position, or

• by selecting the proper side button.

An alert tone will sound and the display will

show SCAN PROGRAM.

Note: The SCAN PROGRAM display is shown

for the duration of scan programming. The

display does not indicate scan programming

status. Scan programming status is indicated

by the LED.

2A. Add a non-priority scan channel to the

scan list by rotating the channel selector

to the desired channel to be added, and

press the select button. The LED will

illuminate green to indicate that the

channel is now in the scan list. Add

another non-priority scan channel to the

scan list by rotating the channel selector

to the next channel to be added. Press

the select button to enter the channel as

a non-priority channel, and again the LED

will illuminate green to indicate that the

channel is in the scan list. A total of 16

non-priority channels can be entered into

the scan list in this manner.

2B. Add a priority scan channel to the scan

list by rotating the channel selector to

the desired channel.

If the selected channel is already in the

s c a n l i s t ( L E D i l l u m i n a t e d g re e n ) ,

pressing the select button again makes

that channel the priority channel. The

LED will change from green to red.

If the selected channel is not already in

the scan list (LED off), add it by pressing

t h e s e l e c t b u t t o n . T h e L E D w i l l

illuminate.green. Press the select button

again to select this channel as the

priority channel. The LED will change

from green to red.

Features (cont.)