- ページ 4

ポータブルラジオ Motorola MCS 2000 IIIのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola MCS 2000 III 20 ページ。

MCS 2000 Models II & III

Depending on programming, if the ignition is turned

off, the radio will:

• turn off

• inhibit transmit capability, or

• inhibit the use of the PTT button.

Contact your system operator for further information.

Turn the radio off by pressing the on/off button (A)

again.

Note: If the radio sounds the error tone and dis-

plays an error message, please contact the per-

son in charge of your radio system or your local

service representative.

Function Selection

Functions programmed into the radio can be selected

in two different ways:

Directly via a pre-programmed, dedicated but-

ton, or

Indirectly via the radio MENU.

For direct access to a feature, depress the desired

function button.

A triangle in the display points to the function button

used.

If the function requires additional input, use the mode

selector (D) to display your choices, and press the

select button (13).

Note: Function buttons are usually active.

Pressing a function button will exit the current

feature and start the selected feature.

Features may be accessed indirectly through the radio

menu.

Press the menu button (9) to enter menu selec-

tion.

Use the mode selector (D) to display the desired

function.

Press the select button (13). The radio will leave

menu mode and enter the selected feature, or

enter a sub-menu.

page 4

68P81083C49-B