- ページ 34

ポータブルラジオ Motorola TETRA CEP400のPDF 基本マニュアルをオンラインで閲覧またはダウンロードできます。Motorola TETRA CEP400 46 ページ。 Portable terminal

Dialing via the Contact List

You can also use the contact list to select a number you previously

stored. Press Contcs and search the stored number by scrolling

(

name using alphabetic search. If the contact has more than one

number, use

A Private Call, also called Point-to-Point or individual call, is a call

between two individuals. No other terminal can hear the

conversation. This call can be:

• a Duplex call (if the system allows) in TMO, or

• a standard Simplex call in TMO or DMO.

1. From the Home display press and hold Direct Private Number

Dialing One-Touch Button, then enter the number.

From the Contact List select a number.

2. For a Simplex call, press and release the PTT button. You will

hear a ringing tone. Wait for the called person to answer your call.

Press and hold PTT. Wait for the talk permit tone (if configured)

before talking, and release the PTT when listening.

For a Duplex call, press and release

tone. Wait for the called person to answer your call.

3. To end the call, press

Call Ended message is displayed.

While Transmit Inhibit is activated, an incoming Private Call is

indicated, but you cannot answer the call.

Receiving a Private Call

1. The CEP400 switches to the incoming Private Call. The display

shows the caller's identity.

2. To answer an incoming Simplex call, press PTT. To answer an

incoming Duplex call (indicated by Spkr/Erpc soft keys),

press

) or by entering up to 12 characters of the contact

to select the number.

. If the called person ends the call, the

or green receiver button.

. You will hear a ringing