- ページ 3
ポータブルラジオ Motorola XPR SeriesのPDF クイック・リファレンス・カードをオンラインで閲覧またはダウンロードできます。Motorola XPR Series 4 ページ。 Digital portable radios
Motorola XPR Series にも： クイック・リファレンス・カード (4 ページ)
ページを印刷する
Making a Group or Private Call
NOTE: Your radio must be programmed for you
to initiate a Private Call.
Press the programmed One Touch Access
button and proceed to Step 2.
OR
Follow the procedure below.
1
Turn the Channel Selector Knob to select the
channel with the active group ID.
OR
Turn the Channel Selector Knob to select
the channel with the active subscriber ID.
2
Hold the radio vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
3
Press the PTT button to make the call. The
LED lights up solid green.
4
Wait for the Talk Permit Tone to finish (if
enabled).
OR
Wait for the PTT Sidetone to finish (if
enabled).
5
Speak clearly into the microphone.
6
Release the PTT button to listen.
7
If the Channel Free Indication feature is
enabled, you will hear a short alert tone
the moment the target radio releases the
PTT button, indicating the channel is free for
you to respond. Press the PTT button to
respond.
OR
If the Voice Interrupt feature is enabled,
press the PTT button to stop the current call
from the transmitting radio and free the
channel for you to talk/respond.
OR
If there is no voice activity for a
predetermined period of time, the call ends.
For a Private Call, you hear a short tone when
the call ends.
Your radio must have the Privacy feature
enabled on the channel to send a privacy-
enabled transmission. Only target radios with
the same Privacy Key OR the same Key
Value and Key ID as your radio will be able to
unscramble the transmission.
Making an All Call
Your radio must be programmed to allow you to
use this feature. Users on the channel cannot
respond to an All Call.
1
Turn the Channel Selector Knob to select the
channel with the active All Call group ID.
2
Hold the radio vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
3
Press the PTT button to make the call. The
LED lights up solid green.
4
Wait for the Talk Permit Tone to finish (if
enabled).
OR
Wait for the PTT Sidetone to finish (if
enabled).
5
Speak clearly into the microphone.
6
If there is no voice activity for a programmed
period of time, the call ends.
When you receive an All Call, you cannot use
any programmed button functions until the call
ends.
Scanning Channels
NOTE: This feature is not applicable in Capacity
Plus.
Press the programmed Scan button to turn scan
on or off.
During scan, the LED blinks yellow.
English