- ページ 4
ヘッドセット Motorola H12 - MOTOPURE H12 - HeadsetのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola H12 - MOTOPURE H12 - Headset 15 ページ。 Universal bluetooth headset
Motorola H12 - MOTOPURE H12 - Headset にも： クイック・スタート・マニュアル (8 ページ), マニュアル (16 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (4 ページ)
ページを印刷する
Press
or
to adjust the hour.
x
w
Repeat Steps 6 and 7 until you have set both digits of the minutes field and
the method of time measurement (
If this is a one-time only alarm, also use Steps 6 and 7 to set the month, date,
and year fields. If this is a daily alarm, leave the dashes (
fields and go to the next step.
Note: Only
or
can be changed. If you are using the
AM
PM
measurement, you cannot change it here.
Press
to accept the alarm setting.
t
In the upper-left corner of the pager,
R
set. When the alarm expires,
flashes and the pager either vibrates or emits
an audible alert until you press a button. If it is a one-time alarm,
disappears from the Status screen after you press a button.
Quiet Time
The pager can receive and store new messages without any alerts for a certain
period of time on a daily basis, regardless of whether the pager is in audible or
silent alert mode. All you have to do is turn Quiet Time on and set the time
period desired. After you turn quiet time on, it activates on a daily basis
W
(indicated by
in the upper-left corner of the pager) until you turn it off.
On the Function menu, press
to move to j (SET QUIET TIME).
v
When you are finished, press
t
One of the following indicators is displayed in the upper-left corner of the
screen:
W
- Quiet time on with no unread messages
W
H
with
flashing - Quiet time turned on with stored, unread messages.
H
- Quiet time off with no unread messages.
H
flashing - Quiet time off with stored, unread messages.
Note: When quiet time is turned on and the pager is set for audible alert,
Y
is displayed in the upper-left corner of the pager except during the
actual quiet time period.
,
, or
) field.
AM
PM
24hr
) in the date
--
time
24hr
R
is displayed, indicating the alarm is
R
to accept the selected quiet time period.
Press
. The Set Quiet Time screen is displayed and the quiet time
t
7
indicator (either
Pager status
Quiet Time
turned off
indicator
Press
or
to turn quiet time on (from
x
w
are turning off quiet time, skip to Step 10.
Press
to move to the starting hour field.
s
Press
or
to adjust the hour.
x
w
Press
to move to the first digit of the minutes field.
s
Press
or
to adjust the first digit of the minutes.
x
w
Repeat Steps 6 and 7 for the second digit of the minutes field and for the
method of time measurement field. You can change between
if you are using the
Repeat Steps 4 through 8 to enter the ending quiet time setting.
Note: If the end time is equal to the start time, the Quiet Time function
is turned off.
11
12
Receiving/Reading a Personal Message
H
A flashing
in the upper-left corner indicates there is at least one unread
message in your pager. If programmed with reminder alerts, your pager alerts
periodically to remind you there are unread messages. Each flashing personal
D
message indicator (
) on the Status screen represents an unread message. A
D
non-flashing
represents a previously read message. If your pager has not
received any messages, there are no personal message indicators displayed on
the Status screen.
When your pager has received a message and an alert is being emitted use the
following steps to read the message.
Press any button to stop the alert. The new message is automatically stored,
along with the time and date it was received. The Status screen displays the
number of the message (03: in this example because it is in the third
message slot) and the first line of the message.
Pager status
Personal messages
received
First line of new message
13
14
c
if off or
if on) flashes.
L
H Y
):)) m
›
START
END
7
-
-
12:00
12:00
Set Quiet Time Screen example
7
c
to
) or off (from
time measurement, you cannot change it here.
24hr
L
HY
):)) m
›
DDPDDD
R
a
q h
03:Call
me
before
New Message example
)%/)!
c
7
to
). If you
and
, but
AM
PM
)%/)!
o b
you