- ページ 3
ヘッドセット Motorola MOTOPURE H15のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Motorola MOTOPURE H15 9 ページ。 Motorola bluetooth handsfree headset quick start guide
Motorola MOTOPURE H15 にも: ユーザーマニュアル (15 ページ), クイック・スタート・マニュアル (26 ページ)
![Motorola MOTOPURE H15 クイック・スタート・マニュアル](/uploads/products/server2/6118163/6118163.png)
Motorola, Inc.
Motorola, Inc.
Consumer Advocacy Office
Consumer Advocacy Office
1307 East Algonquin Road
1307 East Algonquin Road
Schaumburg, IL 60196
Schaumburg, IL 60196
www.motorola.com
www.hellomoto.com
1-877-MOTOBLU
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
hearing impaired)
Guide Number: 68000240001-A
Guide Number: 6809500A86-O
Bluetooth QD ID:B013763
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© 2008 Motorola, Inc. All rights reserved.
USING A SECOND PHONE?
Multipoint technology allows you to make and
receive calls from two Bluetooth enabled
devices like your personal and business phones.
To pair a second phone to your headset, follow
these steps:
1
Turn off any phones or devices that are
already paired with your headset.
2
Turn off your headset by closing the
headset boom.
3
Perform Step 2 ("Start Bluetooth Feature"),
Step 3 ("Pair"), and Step 4 ("Test and Use")
to pair your headset with your second phone.
Your most recently paired phone is now your
primary phone for voice dial functionality.
4
To connect to both phones, turn on first
phone.
5
Close the headset boom and then re-open it.
The headset automatically connects to both
phones. The last paired phone is now your
primary phone for voice dial functionality.
TEST AND USE
4
Your phone and headset are now paired and
ready to make and receive calls. To confirm they
are operating properly, make a call:
1
Place the headset over your ear. See
"Wearing the Headset" on the reverse side
of this guide.
2
On the phone, dial the number you want
to call and press SEND key on your phone.
3
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your phone
and headset, you don't need to repeat these
steps. For daily use, ensure that your headset is
turned ON and that your phone's Bluetooth
feature is ON.
To conserve power, close the boom to turn your
headset off. Re-open the boom to make a call.
TIPS FOR USING H15
WITH TWO PHONES
Use the following tips when using H15's
multipoint technology:
Incoming calls can be answered from both
phones:
– When answering a call, the idle phone is
disconnected from the headset.
– When the call ends, the idle phone is
automatically reconnected to the headset.
Last number redial dials the last outgoing call
made from the primary phone.
Voice dial is accessible from either phone via
different key actions:
– For your primary device (last paired
phone), tap the Call button until you hear
the tone.
– For your secondary device (other paired
phone), tap the Call button and either
Volume button until you hear the tone.