ヘッドセット Motorola MOTOSTART H680のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Motorola MOTOSTART H680 4 ページ。 Bluetooth handsfree headset
ページを印刷する
motorola
Bluetooth
®
Handsfree Headset
Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.
Take a moment before you get started to familiarize yourself with your new H680
Bluetooth Handsfree Headset. Along with your headset, a charger base is provided for
both charging and storage.
Speaker
Power
Switch
H680
Get connected in 4 quick steps.
3
PAIR
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
www.hellomoto.com
For most Motorola phones:
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
1
On your Motorola phone, press
hearing impaired)
Settings > Connection > Bluetooth Link >
Guide Number: 6809510A87-O
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
2
Select
Motorola H680.
3
Select
OK
or
your phone.
MOTOROLA and the Stylized M Logo are registered in the US
4
Patent & Trademark Office. The use of wireless devices and their
Enter the passkey:
accessories may be prohibited or restricted in certain areas.
5
Select OK.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
When your headset successfully pairs and
proprietor and used by Motorola, Inc. under license. All other
connects with your phone, the indicator light
product or service names are the property of their respective
changes from steadily lit to flashing blue.
owners.
Note: These steps are for most Motorola phones.
© Motorola, Inc. 2007.
For other phones, see your phone's user's guide.
BEFORE YOU BEGIN
Charging
Charger
Charging
Volume
Contacts
Cover
Contacts
Buttons
(on reverse
side)
Charger
Port
Microphone
Indicator
Call
Light
Button
4
TEST AND USE
CONTINUED
Your Phone
Your phone and headset are now paired and
ready to make and receive calls.
To make a call:
1
Place the headset over your ear. See
Menu
>
M
(
)
"Wearing the Headset" on the reverse side
of this guide.
2
On the phone, dial the number you want to
call and press SEND key on your phone.
If your phone and headset are successfully
Yes
to pair your headset with
paired, you will hear ringing on the headset.
After you have successfully paired your
0000
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
1
2
START BLUETOOTH
CHARGE
Your Headset's Battery
1
Plug the Motorola charger into the port on the
charger base.
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
2
Place headset into charger base ensuring that
Bluetooth feature in your phone.
charging contacts on the headset and
charging base connect.
For most Motorola phones (at the main menu):
1
Menu
Press
M
(
Charging
Bluetooth Link > Setup.
Contacts
2
Scroll to
Power.
3
Select
Change.
The indicator light turns red when the battery
4
Scroll to
On.
is charging. It may take up to 1 minute for the
indicator light to turn on. When the headset's
5
Press
Select
battery is fully charged (about 2 hours), the
feature. The Bluetooth feature remains on
indicator light turns off.
until you turn the feature off.
3
Disconnect the charger.
Note: These steps are for most Motorola phones.
Note: Headset is not functional while charging.
For other phones, see your phone's user's guide.
STORING YOUR
USING YOUR H680
HEADSET
The charger base provided is used to charge
Functions Guide
and store your headset. When not using your
on the reverse side
headset, you should place it in the charger
for information on
base.
using your H680
As shown, the charger cover can be placed on
top of the charger base, or underneath it to
provide support for desktop placement.
3
PAIR
FEATURE
Your Headset
Your Phone
Before you can use your headset, you must pair
(link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING
MODE
Remove headset from charging base and
> Settings > Connection >
)
power on by sliding Power switch to the On
position (towards Power symbol on headset).
The indicator light flashes to initiate easy
pairing. After a few moments, the indicator
light will be steadily lit in blue to indicate
headset is in pairing mode.
to turn on the Bluetooth
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
TROUBLESHOOTING
My headset will not enter pairing mode.
See
Make sure that any devices previously paired with
Features and
the headset are turned off. If the indicator light is
not steadily lit in blue, turn off both the other
device and headset, wait 10 seconds, then turn
headset back on. Wait for the indicator light to
become steadily lit in blue, indicating the headset
is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2). If
the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and pair
your phone and headset again (see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/Bluetoothsupport
Indicator Light
(steadily blue
for pairing mode)