- ページ 6

ヘッドセット Motorola Noise-com ENMN4010のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Motorola Noise-com ENMN4010 32 ページ。

Disconnecting the noise-com from the radio

1. Switch the radio OFF.

2. Loosen the radio audio adapter screw and

remove the adapter from the side of the radio.

3. Replace the radio audio adapter dust cover.

Cleaning of the noise-com parts

CAUTION: The speaker and the

microphone are sensitive parts -

always handle with care.

CAUTION: Do not apply solvents or

similar caustic chemicals.

The unit can be cleaned with a damp cloth or

brush and a mild detergent solution (e.g. washing

up liquid).

Clean the connector with high-quality Vaseline

spray or a similar type of lubricant.

SERVICE

This product contains no serviceable parts.

Replacement noise-com, microphone wind

shields 2604002K01 (pack of five) are available,

please contact your local Motorola representative

or Dealer for details.