- ページ 7

モデム Motorola 202TのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Motorola 202T 14 ページ。 Setting a modem

INTUITY AUDIX LX Release 1.0

Centrex Integration

Setting the 202T Modem

Setting Options for the AT&T Dataphone 202T Modem

3. To replace the top cover, complete the following Steps a and b:

4. Set the front dial to DATA (see

Figure 6-4. Front Panel of the Motorola 202T Modem Showing the Dial Setting for

DATA

5. Continue with

Setting Options for the AT&T

Dataphone 202T Modem

The AT&T Dataphone 202T modem has three switches — S2, S3, and S4 — that

you must set before installing the integration hardware.

Location of Switches

Figure 6-5

a. Line up the guides with the front and back panels.

The guide for the front panel is slightly farther from the edge of the

cover.

b. Slide the cover into place.

The cover clicks when the latches are secure.

NOTE:

Installers in Canada should replace the screw or the locking

tabs.

Chapter 7, Hardware Installation for Centrex Switch

Integration with the 202T

shows the location of the switches.

Figure

6-4).

Modem.

Issue 1

May 2002

Page 6-7