- ページ 9
データロガー AEMC instruments L452のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。AEMC instruments L452 17 ページ。
ページを印刷するChoosing the Interface Language
1. At the "home" screen, press ► four times to display the Language and Date/Time
Format screen.
2. Press the Enter
3. Use the ▲ or ▼ button to cycle through the available languages: English,
Español, Italiano, Deutsch, and Français.
4. When the desired language choice is displayed, press
will appear in the selected language.
Setting the Instrument Date and Time
1. With the Language and Date/Time Format screen displayed, press
initiates selection mode; the setting under the Language field will change to
blinking reversed text.
2. Press ▼. The setting under Date/Time will appear in blinking reversed text.
3. Press
to initiate edit mode.
4. Press ▲ or ▼ to cycle through the available options for date and time format.
5. After you make your selection, press
Date/Time Format screen should now appear in regular text.
6. Press ▼ three times. The Date and Time screen will appear.
Press
once to initiate selection mode. The first number in the Date field will
blink. To change this number, press
▼ buttons to increase/decrease this number until the correct value is displayed.
To change the other two settings in the Date field, press ► to navigate to the
number you want to set. Then, press ▲ or ▼ to change the setting. You can also
use ◄ to navigate back to a previous number.
7. To change the Time field, press ► while the last number in the Date field is
selected. This highlights the first number in the Time field.
Alternatively, if you are not in edit mode (for example, you have opened the
Date and Time screen and only want to change the time while leaving the date
unchanged), press
the Date field is blinking, press ▼. The first number in the Time field will blink;
press
to initiate edit mode.
8. Change the numbers in the Time field using the buttons as explained in the steps
above.
9. When you have finished setting the Date and Time values, press
changes and leave edit mode.
button twice.
to initiate selection mode. Then, while the first number in
to save it. All fields on the Language and
to initiate edit mode. Then, use the ▲ and
. The text on all screens
. This
to save your