- ページ 3

ソフトウェア Epson 410W - PowerLite WXGA LCD ProjectorのPDF 製品サポート速報をオンラインで閲覧またはダウンロードできます。Epson 410W - PowerLite WXGA LCD Projector 22 ページ。 Remote control information
Epson 410W - PowerLite WXGA LCD Projector にも：ユーザーマニュアル (42 ページ), クイック・セットアップ・マニュアル (6 ページ), 操作マニュアル (47 ページ), ユーザーマニュアル (1 ページ), 仕様 (2 ページ), 適合宣言 (4 ページ), ユーザーマニュアル (2 ページ), パーツリスト (1 ページ), 製品サポート速報 (25 ページ), 製品サポート速報 (22 ページ), 製品サポート速報 (28 ページ), 製品サポート速報 (41 ページ), 製品サポート速報 (15 ページ), インストレーション・ハンドブック (5 ページ)

Limitations

When the PowerLite1725 / 1735W exhibit a Lamp Cover Open error state,

EMP Monitor cannot detect the error. The reason is that when the lamp

cover is opened, the primary power source that reports the error state to

EMP Monitor is turned off immediately. This is different from other models

which make the secondary power source turn off under the same condition.

Note: EMP Monitor Ver. 4.xx is not compatible with EMP Monitor Ver. 3.05 and earlier

versions. EMP Monitor Ver. 4.xx cannot read the setting files of EMP Monitor Ver. 3.05

and earlier versions.

System Requirements:

CPU

Memory

Available hard disk

space

Display

Obtaining the Update:

Download epson13055.exe from

Monitor. The files are extracted and copied to C:\EPSON\epson13055_emp_monitor_430.

This file is a self-extracting archive and will start the installation utility for EMP Monitor. Follow

the on-screen instructions during the installation process.

•

Windows 98 SE / Me / NT 4.0 (SP6) *Except Arabic and

Hebrew / Windows 2000 Pro / XP Home Edition / XP

Professional (32 bit) / Vista Home Basic / Home Premium /

Ultimate / Business / Enterprise (32 bit) *Except Ukrainian /

Vista SP1 Home Basic / Home Premium / Ultimate /

Business / Enterprise (32 bit)

•

Internet Explorer Ver. 5.0 or later must be installed

Minimum: Pentium MMX 166 MHz (Recommended: Pentium II

233 MHz or higher)

At least 64 MB (Recommended: 128 MB or above)

At least 50 MB

SVGA (800×600) or higher resolution, 32 bit or higher display

color

www.epson.com

Page 3 of 4

PSB.2009.06.001

to get the version 4.30 update for EMP