ソフトウェア Epson 6100i - PowerLite XGA LCD ProjectorのPDF クイックセットアップをオンラインで閲覧またはダウンロードできます。Epson 6100i - PowerLite XGA LCD Projector 2 ページ。 Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Epson 6100i - PowerLite XGA LCD Projector にも： ユーザーマニュアル (42 ページ), 操作マニュアル (36 ページ), 仕様 (2 ページ), 操作マニュアル (47 ページ), インストレーション・マニュアル (19 ページ), 機能マニュアル (5 ページ), サプリメント (1 ページ), パーツリスト (1 ページ), 製品サポート速報 (25 ページ), 製品サポート速報 (22 ページ), 製品サポート速報 (28 ページ), 製品サポート速報 (41 ページ), 製品サポート速報 (15 ページ), 製品サポート速報 (22 ページ)

ページを印刷する
Epson 6100i - PowerLite XGA LCD Projector クイックセットアップ
C
onnect the projector
to your notebook
1
Locate the required cables:
Power cord
VGA computer cable
2
C onnect the computer cable to
the blue Computer1 port
on the projector.
3
Connect the other end to your notebook's video-out
or
monitor port.
NOTE:
If your notebook has a DVI connector, you need to use an
optional DVI-to-VGA adapter with the included computer cable
(see your computer's documentation).
4
Connect the power cord to the
projector, then plug the other end
into an electrical outlet.
T
urn on your equipment
1
T urn on your notebook.
2
M ake sure the projector's
Power light is orange
and not flashing.
3
Press the
Power button
to turn on the projector.
CAUTION: Before unplugging the projector...
Shut down the projector properly:
1. Press the
Power button twice.
2. W hen the
Power light is steady orange, you can unplug the
projector.
W ith Epson's exclusive Instant Off
period, so you can pack up and go immediately after turning off
the projector.
CAUTION: Never unplug the projector when the
green or flashing orange.
Power
light
Power
button
TM
technology there's no cool-down
Power light is
Epson
Follow these instructions to connect the projector to your
notebook. For other setup options, see your User's Guide.
A
djust the image
1
I f you've turned on your notebook and you don't see an image, press
the Source Search button on the projector to select the image source.
NOTE:
If you still see a blank screen or have other display problems,
see the troubleshooting tips on the back of this sheet.
2
O pen the lens access door.
3
T urn the focus ring to
sharpen the image.
Turn the zoom ring to
reduce or enlarge
the image.
4
I f your image looks like
to one side of the screen at an angle. Place it directly in front of the
center of the screen, facing the screen squarely.
5
I f your image looks like
on the projector to correct it.
Turn over
PowerLite
6100i
®
®
Quick Setup
or
, you've placed the projector off
or
, press the
or
buttons
Focus
Zoom