❏ Place the printer on a desk. If you cannot place
the printer on a desk, you will need the Stand.
If you place your printer on a desk, follow the
guidelines listed below.
❏ Choose a desk that can hold the printer
weight (about 49 kg) and has a height of
600-800 mm from the floor.
❏ Make sure the surface is flat and stable.
❏ Place the front rubber legs of the printer
just at the end of the desk.
❏ Leave enough room (over 600 mm) in
front of the desk.
❏ Prevent your printouts from getting dirty
or crinkled.
❏ Use a grounded power outlet. Do not use a
damaged or frayed power cord. Avoid using
an outlet that is shared with other appliances.
❏ Use only an outlet that meets the power
requirements of this printer.
❏ Operate the printer under the following
conditions:
Temperature: 10 to 35°C
Humidity:
20 to 80% without condensation
❏ Avoid locations that are subject to direct
sunlight, excessive heat, moisture, or dust.
❏ Do not block the ventilation openings.
❏ Avoid locations near potential sources of
interference such as loud speakers or cordless
phones.
❏ Avoid locations near TVs, radios, air
conditioners, or humidifiers.
❏ Avoid locations that are subject to shocks or
vibrations.
❏ Keep the printer away from combustible
substances.
❏ Keep the printer away from dusty areas.
12
Deciding Where to Unpack the Printer
Before unpacking, read the followings:
❏ Setup and assemble the printer near to the
chosen place of use, as moving the printer may
result in damage.
❏ Allow floor space of 2.5 × 2.5 m approx., and
height of at least two times that of the larger
box containing the printer unit.
Unpacking the Printer
c
Caution:
The printer unit is heavy and unwieldy.
Have two people unpack the printer.
1. Open the box containing the printer and
remove the roll paper spindle with roll paper,
polystyrene foam, and cardboard cushions
from around the printer.
2. Remove the fixers from the sides of the box.
ページを印刷する