- ページ 7

ソフトウェア Epson 9800 - Stylus Pro Color Inkjet PrinterのPDF 開梱・セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Epson 9800 - Stylus Pro Color Inkjet Printer 27 ページ。 Stylus pro 800 series
Epson 9800 - Stylus Pro Color Inkjet Printer にも：パンフレット＆スペック (8 ページ), スタートマニュアル (10 ページ), ユーザーマニュアル (11 ページ), クイック・リファレンス・マニュアル (12 ページ), 限定保証 (12 ページ), パンフレット＆スペック (8 ページ), パンフレット＆スペック (6 ページ), パンフレット＆スペック (16 ページ), お知らせシート (4 ページ)

Tools:

Hex wrench

Hex socket head bolts (4)

Wing nuts, spring washers, and washers(2)

H is for connecting the printer unit to the base unit.

Paper feed support films (5)

Assembling the base unit

Caution:

Have two people working on either side to

assemble the base unit (20.5 kg).

1. Hold base upright left (A) and a horizontal

strut as shown. Then fix the strut to the base

using the two hex socket head bolts (G) with

the hex wrench (F).

Note:

❏ An instruction sticker about the setting paper

basket is attached to the front of a base upright

right.

❏ Do not fasten the screws too tight. Leave a

room to adjust the position when you fasten

the screw on the other base upright.

2. Referring to step 1, secure the other side of the

strut to the base (B).

3. Fasten four screws on the both sides of the

base upright securely.

This completes assembly of the base unit. Before

attaching the paper basket, mount the printer on

the base unit.

Unpacking the printer

Caution:

The printer unit is heavy and unwieldy. Have

two people unpack the printer unit, and four

people place the printer unit on top of the base

unit.

1. Remove the roll paper spindle with roll paper,

polystyrene foam, and cardboard cushions

from around the printer.