- ページ 10
ソフトウェア Epson C11C605001 - DFX 9000 B/W Dot-matrix PrinterのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer 28 ページ。 User guide - remote configuration manager
Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer にも： 仕様 (2 ページ), ファームウェアのアップデート (1 ページ), ユーザーマニュアル (15 ページ)
ページを印刷する
3.
Position the left sprocket so the pins are to the left of the arrow mark on the
scale. Push up the sprocket lock lever to lock it in place.
4.
Slide the right sprocket to match the width of your paper. (Do not lock it in
place yet.)
5.
Center the two paper supports between the two sprockets.
Note:
For paper less than four inches wide, remove the paper supports by pulling them
off the tractor.
10 Loading Paper On the Front Tractor
arrow mark
paper supports
6.
Open both sprocket covers.
sprocket cover
7.
Be sure your paper has a clean, straight edge and that the printable side of
the paper is facing up. Fit the first few holes over the sprocket pins and close
the sprocket covers.
8.
Slide the right sprocket until the paper is straight and there is no slack. Lock
the sprocket by pushing up the sprocket lock lever. (The right sprocket may
move slightly.)
Note:
Be careful not to pull the paper too tightly.
sprocket lock lever