- ページ 8

ソフトウェア Epson EasyMP Monitor 4.50のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Epson EasyMP Monitor 4.50 47 ページ。 Operation guide - easymp monitor v4.50
Epson EasyMP Monitor 4.50 にも：操作マニュアル (11 ページ)

ページを印刷する

Installing EasyMP Monitor

• If your operating system is Windows Vista or Windows 7

Place the copy of the EMP Monitor.dat file in "C:\Users\(User

Name)\AppData\Local\VirtualStore\Program Files\EPSON

Projector\EasyMP Monitor Ver.x.xx".

The software name has been changed.

Before: EMP Monitor _ After: EasyMP Monitor

If you are already using EMP Monitor, you can replace with this software.

Installing

You must have administrator authority in order to install EasyMP

Monitor.

To download the software and manual, visit

your location.

Double-click the downloaded software file to start the install program.

Follow the on-screen instructions.

If EasyMP or EMP Monitor is already installed, uninstall it before

installing this software. s "Uninstalling EasyMP Monitor"

Limitations imposed by a Windows Vista or Windows

7 environment

When using EasyMP Monitor under Windows Vista or Windows 7, note

the following limitations.

• You must have administrator authority in order to use Register at

startup on the Environment setup screen of EasyMP

Monitor.s "Monitoring using the system tray"

www.epson.com

and select

p.46

p.26

• If EasyMP Monitor is installed on your computer, uninstall it before

you update the operating system to Windows Vista or Windows 7.

Updating your OS without uninstalling the software may cause a

malfunction. s "Uninstalling EasyMP Monitor"

Before starting operations

Check the following points before starting up EasyMP Monitor.

• EasyMP Monitor must be installed on the computer to be used for

monitoring and control.

• The computer and the projectors must be connected to the network.

• Depending on the projector model, a commercially-available serial W

TCP/IP conversion adapter and a connection cable are required in

order to use EasyMP Monitor. See your projector's User's Guide.

Make the settings for the serial W TCP/IP conversion adapter before

connecting to the projector.

To enable projectors to be monitored and controlled even when they are in

standby mode

, make the following settings at the projectors. The settings

that need to be made will vary depending on the projector you are using.

See your User's Guide for more information.

• Set Standby Mode to Communication On (or Network On).

• Set Network Monitoring to On.

* When the projector's

p.46

indicator is lit orange.