- ページ 7

ソフトウェア Epson EasyMP Monitor 4.50のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Epson EasyMP Monitor 4.50 11 ページ。 Operation guide - easymp monitor v4.50
Epson EasyMP Monitor 4.50 にも：操作マニュアル (47 ページ)

ページを印刷する

The Epson Brightlink 485wi, 585wi, and 685wi Interactive Projectors are each a step up

respectfully in functionality from the 450/455wi. The user interface for the interactive tools looks

different on each iteration of the projector. Also, the drivers for the three models will automatically

install when connecting the projector to the computer via the USB cable.

Connecting to a computer/document camera

•

Projectors are connected to classroom computer via HDMI or VGA, and USB cables.

a. Projectors have two points of connection: Face plate at computer, Faceplate at

projector.

•

HDMI cables transfer video and audio. VGA cables transfer video only. Wall face plate at

computer will likely have an HDMI connection and VGA connection. It is standard practice to

connect the computer via an HDMI cable. There may also be a VGA w/ audio connection point.

This connection is usually used for a classroom document camera.

•

USB cable allows interactive function of pens. USB cable must be connected at wall face plate at

computer and projector.

Interactive Tools

As previously stated, the user interface for the interactive tools takes on a different appearance.

To begin, these models come with a built-in annotation functionality. This means annotation can/will

work without downloading the Interactive Tools Software.

•

Interactive Pen Calibration: Pens on the Epson 485wi are calibrated using the projector remote.

a. Before calibrating, the board should be as clear of obstructions as possible.

MAGNETS)

b. Locate the "User" button on the remote. (Bottom-left of the navigation arrows near the

center of the remote.)

c. After pressing the User Button, you will see this screen. Press "Ok" and allow the

projector to calibrate.

d. Once calibration is complete, test the pen to ensure the cursor is lined up with the pen

tip.

e. If calibration fails, user may attempt to recalibrate. Should it fail again, please contact

the AV Department of Technology Services.

Projector Connections

Epson Brightlink 485wi, 585wi, and 685wi

(Certainly