- ページ 4

ソフトウェア Epson EMP MonitorのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Epson EMP Monitor 12 ページ。 Emp monitor for projectors
Epson EMP Monitor にも：操作マニュアル (11 ページ), ユーザーマニュアル (42 ページ), 操作マニュアル (34 ページ), 操作マニュアル (14 ページ), 操作マニュアル (37 ページ)

Operating Environment

You can display status information on a computer screen for multiple

projectors that are connected to a network and also carry out batch operations

on all projectors such as turning the power on and off and changing the image

source. A maximum of 64 projectors can be monitored and controlled by batch

operations.

Projector A

Projector B

Projector C

System configuration example

TIP

If the projector's "Network Monitoring" or "Standby Mode"

configuration menu is set to "ON" or "Network ON", the projector

can still be monitored when it is in standby mode (when the

indicator is lit orange).

Turn on

projector B

EMP Monitor

(Power)

* Macintosh computers cannot be used.

OS*

98SE/Me/NT4.0/2000 Professional/XP Home Edition/XP

Professional

CPU

Pentium MMX 166 MHz or higher (Pentium II 233 MHz

or higher recommended)

Memory

64 MB or more (128 MB or more recommended)

capacity

Free hard disk

6 MB or more

space

Display

XGA (1024×768) or higher resolution, 16 bit or higher

display colour

Check the following points before starting up EMP Monitor.

• EMP Monitor must be installed in the computer to be used for monitoring

and control.

• The computer and the projectors must be connected to the network.

• If using Windows 2000, NT4.0 or XP, the computer must be started up in

Administrator mode.