- ページ 13

ソフトウェア Epson Endeavor WGのPDF 製品サポート速報をオンラインで閲覧またはダウンロードできます。Epson Endeavor WG 15 ページ。 Using with ms windows 3.x stylus 400/800+/color printer driver
Epson Endeavor WG にも：製品サポート速報 (17 ページ), 製品サポート速報 (3 ページ), マニュアル (9 ページ)

ページを印刷する

STB Systems WIND/X video adapter gives no display using default

settings.

Resolution: A temporary solution is to change the WIND/X jumper J3

to select 8-bit instead of 16-bit VGA BIOS. A permanent solution is

under investigation.

When the slow speed is set via SETUP, SIMM memory is not

recognized.

Resolution: BIOS version 1.02.1.03.

In a server configuration, when the slow speed is set via keyboard

(CTRL-ALT-minus) and the NetWare 3.11 SERVER.EXE program is

executed, the system hangs.

Resolution: Under investigation. Probable BIOS revision required.

Too many invalid commands cause AutoCAD's Phar memory manager

to fail. It will usually display the message "Heap stack error". At this

point, AutoCAD may fail or terminate, dropping back out to DOS.

Resolution: BIOS version 1.02.1.03.

Streaks or lines may appear on the screen when using Windows 3.0 or

3.1 applications in standard VGA mode. This is not noticeable during

Windows installation.

Resolution: For configurations that have Windows 3.1 preinstalled, the

default display setting will be the Wingine 640 x 480 x 256 color driver,

so the problem will not occur. For other configurations, the appropriate

Wingine display driver should be installed, following the procedure in

the Progression VGA Utilities Guide. A permanent solution is under

investigation, and may be provided by a system board revision.

Flash BIOS version 1.02.1.03 may be downloaded from file library BIOS on

the Epson Bulletin Board System (310-782-4531). The filename is

102103.ZIP and it contains the BIOS code, the FLASHLDR.EXE program

and a text file of instructions. Download with protocol and extract with

PKUNZIP version 1.10 or later. Copy the extracted files to a clean MS-DOS

boot diskette, boot the system with that diskette and run FLASHLDR.

PSB No: S-0152A

Page: 2 of 2