- ページ 7
ソフトウェア Epson Perfection 1670 PhotoのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Epson Perfection 1670 Photo 9 ページ。 Color image scanner
Epson Perfection 1670 Photo にも: 製品情報 (7 ページ), マニュアル (11 ページ), 更新 (1 ページ), 製品サポート速報 (17 ページ), 製品サポート速報 (12 ページ), 重要な安全上のご注意 (4 ページ), パンフレット&スペック (2 ページ), サービスマニュアル (46 ページ)
![Epson Perfection 1670 Photo スタートマニュアル](/uploads/products/server2/620645/620645.jpg)
Tip:
•
Make sure your negatives or slides are dust-free for the
best scan. You can also select the Dust Removal setting
in EPSON Scan to improve your scan.
•
If your scanned image is upside down, you can use the
buttons in EPSON Smart Panel (not available in all Smart Panel
applications) or in
rotate the image in most image-editing applications.
Storing the Film Holder
When you're finished scanning, you can store the film holder in the scanner
cover.
1
Lift the cover and remove the document mat.
2
Slide the film holder into the cover.
3
Replace the document mat.
Problems?
First, check the ] Start button light on the scanner.
Flashing green
Green
Flashing red
Off
If your problem is listed here, try these suggestions.
The New Hardware Wizard
appears on your screen.
You see an error message
when you try to scan, or
the scanner doesn't scan.
You can't scan negatives
or slides.
Preview mode in EPSON Scan. You can also
Warming up or scanning.
Ready to scan.
Make sure the transportation lock is unlocked (see
section 3).
Try restarting your computer and unplugging the
scanner. Wait 10 seconds, then plug the scanner
back in.
If the red light is still flashing, contact your dealer or
EPSON.
Make sure your scanner is connected to your
computer and plugged into a power source.
Click Cancel and follow the steps in "Install the
Software" on the other side of this sheet.
Disconnect the scanner before installing the
software.
Make sure your scanner is connected to your
computer and plugged into a power source.
Make sure the transportation lock is unlocked (see
section 3).
Uninstall and reinstall EPSON Scan.
Make sure the transparency unit cable is
connected to the scanner (see section 3) and the
reflective document mat is removed. In Home or
Professional Mode, make sure the Document Type
matches the film type you're scanning.
Also, make sure the film holder position is correct
for the type of film you're scanning.
Rotate