- ページ 2

ソフトウェア Epson Perfection 640U SeriesのPDF 製品情報マニュアルをオンラインで閲覧またはダウンロードできます。Epson Perfection 640U Series 5 ページ。 Information for cd-roms
Epson Perfection 640U Series にも: ユーザーマニュアル (7 ページ), 仕様 (2 ページ), 製品サポート速報 (23 ページ), マニュアル (11 ページ), 製品サポート速報 (40 ページ), 製品サポート速報 (17 ページ), 製品サポート速報 (3 ページ), 製品サポート速報 (24 ページ), 製品サポート速報 (29 ページ), 製品サポート速報 (8 ページ), 製品サポート速報 (3 ページ), 製品サポート速報 (11 ページ), 製品サポート速報 (14 ページ), 製品サポート速報 (18 ページ), 製品サポート速報 (12 ページ), 製品サポート速報 (40 ページ), 製品サポート速報 (11 ページ), 製品サポート速報 (40 ページ), 製品サポート速報 (22 ページ), 製品サポート速報 (12 ページ), 製品サポート速報 (21 ページ), 製品サポート速報 (12 ページ), 製品サポート速報 (31 ページ), 適合宣言 (2 ページ), スタートアップマニュアル (26 ページ), 補足情報 (6 ページ)

Epson Perfection 640U Series 製品情報マニュアル
EPSON Perfection 640U
Environmental
Temperature
Operation: 41 to 95 °F (5 to 35 °C)
Storage: –13 to 140 °F (–25 to 60 °C)
Humidity
Operation: 10% to 80%
(without
Storage: 10% to 85%
condensation)
Operating
Ordinary office or home conditions; avoid
conditions
extreme dust, direct sunlight, and strong
light sources. Make sure the outlet
provides enough power.

Safety Approvals

120 V model
Safety standards
UL 1950
CSA C22.2 No. 950
EMC FCC part 15 subpart B class B
230 V model
Safety standards
EN 60950
EMC EN 55022 (CISPR Pub 22) class B
CE marking
230 V model
Low Voltage Directive 73/23/EEC
EN 60950
EMC Directive 89/336/EEC
EN 55022 Class B
EN 50082-1
2 - EPSON Perfection 640U
CSA C108.8 class B
AS/NZS 3548 class B
IEC 60801-2
IEC 60801-3
IEC 60801-4

USB Interface

Interface type
Universal Serial Bus Specification
Revision 1.1
Configuration
Element
Description
Configuration
Characteristics: Self-powered
Remote wake up feature: Not supported
Maximum power consumption from VBUS:
2mA (5V)
Interface
No alternate setting
Number of endpoints used by this interface
(excluding endpoint 0): 2
Class: Vendor specific
Endpoint 1
Bulk IN transfer
Maximum data transfer size: 64 byte
Endpoint 2
Bulk OUT transfer
Maximum data transfer size: 64 byte
String Descriptor
Language ID: US English
1: Manufacturer: "EPSON"
2: Product: "Perfection 640U"
Electrical standard Full Speed mode (12Mbit/s) of
Universal Serial Bus Specification
Revision 1.1
Connector type
One receptacle (Type B)
Connector pin arrangement
Pin number
1
2
3
4
Initialization
The scanner can be initialized (returned to
methods
a fixed set of conditions) in the following
ways:
Hardware
* The scanner is plugged in.
initialization
* The USB cable is unplugged from the USB port
on the scanner.
Software
* Software sends the ESC @ (initialize the scanner)
initialization
command.
* The scanner receives a Bus Reset from the USB
interface.
10/00
Signal
Connector
VCC
DATA
+DATA
GND