- ページ 4
エアコン Toshiba 16J2AVSG-E1のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba 16J2AVSG-E1 20 ページ。 Air conditioner (split type)
Toshiba 16J2AVSG-E1 にも： インストレーション・マニュアル (20 ページ)
ページを印刷する
INDOOR UNIT DISPLAY
1
● Display brightness can be adjusted, follow procedure on ".
PREPARATION BEFORE USE
2
Preparing Filters
1. Open the air inlet grille and remove the air filters.
2. Attach the filters. (see detail in the Installation Manual).
Loading Batteries (when use wireless operation.)
1. Remove the slide cover.
2. Insert 2 new batteries (AAA type)
following the (+) and (–) positions.
Remote Control Reset
1. Remove the batteries.
2. Press
.
3. Insert the batteries.
AIR FLOW DIRECTION
3
FIX
Press
: Move the
1
louver in the desired vertical
direction.
FIX
Press
: Move the
2
louver in the desired horizontal
direction.
SWING operation can be
selected from MENU button
MENU
V
Swing off
H
3
V
H
H.DA
Note:
● Do not move the louver manually by hands or others.
● The louver may automation positioning by some operation mode.
1 ECO (White)
2 Wi-Fi access (White)
3 PURE (White)
4 Timer (White)
5 Operation Mode
- Cool (Blue)
- Heat (Orange)
● Vertical (Up-Down) swing
Vertical
(Up-Down)
Swing
● Horizontal (Left-Right) swing
Horizontal
(Left-Right)
Swing
Vertical and
Horizontal
Swing
● HADA Care flow
HADA CARE
FLOW
REMOTE CONTROL
4
1 Infrared signal emitter
2 Start/Stop button
3 Mode select button
4 Temperature button
5 Fan speed button
6 Menu select button
7 Set louver Up-Down button
8 Set louver Left-Right button
9 Check button*
*Check button under battery cover
9
COOLING / FAN ONLY / OPERATION
5
1. Press
: Select Cool
2. Press
: Set the desired temperature. Min. 17°C, Max. 30°C.
Fan Only: No temperature indication
FAN
3. Press
: Select AUTO, LOW , LOW+
MED+
, HIGH
AUTOMATIC OPERATION
6
To automatically select cooling, heating, or fan only operation
1. Press
: Select Auto A.
2. Press
: Set the desired temperature. Min. 17°C, Max. 30°C.
FAN
3. Press
: Select AUTO, LOW , LOW+
MED+
, HIGH
HEATING and 8°C OPERATION
7
1. Press
: Select Heat
2. Press
: Set the desired temperature. Min = 5°C, Max = 30°C.
* Temperature range 5-16°C is Heat mode with 8°C operation with less of
energy usage
FAN
3. Press
: Select AUTO, LOW , LOW+
MED+
, HIGH
Note: During 8°C mode active (temperature range 5-16°C), some operation
such as QUIET, HI-POWER, TIMER OFF cannot use.
DRY OPERATION
8
For dehumidification, a moderate cooling performance is controlled
automatically.
1. Press
: Select Dry
2. Press
: Set the desired temperature. Min. 17°C, Max. 30°C.
Note: DRY mode fan speed is set to Auto only.
1
2
3
MODE
5
FAN
MENU
FIX
FIX
7
, or Fan only
.
, MED
or Quiet
, MED
or Quiet
.
, MED
or Quiet
.
4
6
8
,
,
,