- ページ 7
エアコン Toshiba 18E2KVG-AのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba 18E2KVG-A 12 ページ。
ページを印刷する
9. Adding or editing the program.
The program can be set to perform on all the required
days until
10. If adding or editing a program is required, please repeat
steps 2 - 8 before setting confi rmation.
11 After adding or editing, press
setting*.
Weekly timer running
Next program
Timer ON or OFF
*Point remote control at air conditioner receiving module
then, press SET button until you hear the "PiPi" sound.
This means the setting operation has been completed.
As the air conditioner is receiving the signal, you will hear
separate "Pi" sounds corresponding to the number of days
in the selected setting.
An incomplete setting is indicated if the TIMER lamp is
blinking. Press
Notes :
1. Place the remote control where the indoor unit can receive the signal. This will
increase the accuracy of the timing between the remote control and the air
conditioning unit.
2. The ON/OFF timer can be set during the WEEKLY TIMER operation. In this
situation, the air conditioner will fi rst follow the normal timer until it is complete;
then, it will return to the WEEKLY TIMER function.
3. During WEEKLY TIMER operation, all of operation such as MODE, TEMP, FAN,
Hi POWER, ECO and etc., can be adjusted but when the clock reaches the
program setting, the operation will return to the set items in the program.
4. When the remote control is sending a signal to the air conditioner, avoid
interference from objects that can block the signal.
Edit Weekly timer program
To edit the program after confi rming the weekly timer setting,
follow steps 1 - 3 below.
1. Press
● The day of the week and the program number of the
current day will be displayed.
2. Press
● Resetting the operation.
3. Press
Deactivating WEEKLY TIMER operation
Press
● The "WEEKLY" indicator will disappear from the
LCD. However, the program will remain in the remote
control.
● The TIMER lamp goes off.
● To reactivate the WEEKLY TIMER operation again,
press
The program, after reactivation, is related to the clock time.
is pressed to confirm the setting.
to confirm the
Operating Mode
Display after
pressing SET
button
Next operation
Operating Temperature
time
and Fan speed
twice.
.
to select the day of the week and press
to select program number to be confirmed.
to exit confi rming mode.
while "WEEKLY" is displayed on the LCD.
again, LCD shows the next program.
To delete programs
The individual program
1 Press
.
● The day of the week and the program number is
displayed.
● Select the day to delete the program.
2. Press
to select the program number to be
deleted.
3. Press
.
● ON or OFF timer will be cleared and the LCD will
blink.
4. Press
to delete the program.
● Press
while the LCD is blinking.
The program has now been deleted.
All programs
1. Press
.
● The day of the week and the program number will
be displayed.
2. Press
and hold for 3 seconds.
● All programs will be deleted and LCD displays
current operation.
Notes :
Make sure the remote control receiving module on the air
conditioner receives the signal from the remote control.