- ページ 7

室内暖炉 Dimplex BF362SDのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dimplex BF362SD 14 ページ。
Dimplex BF362SD にも：オーナーズマニュアル (12 ページ), サービスマニュアル (13 ページ)

ページを印刷する

1. Operation

Operation

Figure 1

The overheat cutout will be trig-

gered if the filter is dirty. Follow

filter

maintenance.

CAUTION:

continuously reset the heater, dis-

connect power and call Dimplex

customer service at

(1-888-346-7539).

Remote Control

The fireplace is supplied with a

radio frequency remote control.

This remote control has a range

of approximately 50 feet (15.25

m), it does not have to be pointed

at the fireplace and can pass

through most obstacles (including

walls). It is supplied with one of

hundreds of independent frequen-

cies to prevent interference with

other units.

NOTE: Before attempting any

If you need to

Manual Controls

operation with the remote control,

pull the plastic insulator strip out

from between the remote casing

and battery cover.

Remote Control Initialization/

Reprogramming

This procedure is required every

time there is a loss of power to

the remote control in the fire-

place. (i.e. power failure, breaker

tripped, On/Off switch is turned

off.)

1. Ensure that power is supplied

through main service panel.

2. Locate manual controls.

3. Activate On/Off switch. (Fig-

ure 1A)

4. Press and hold the 3-Posi-

tion Switch in the "I" position

for 5-10 seconds until the

indicator light begins to flash.

B. Mode

Selector Switch

A. On/Off

Switch