- ページ 2
ソフトウェア Epson PowerLite 1222のPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Epson PowerLite 1222 4 ページ。 Powerlite 1222 and 1262w 3lcd projectors
Epson PowerLite 1222 にも： 操作マニュアル (48 ページ), クイック・リファレンス・マニュアル (4 ページ)
ページを印刷する3
To reduce or enlarge the image, turn the zoom ring.
4
Turn the focus ring to sharpen the image.
5
If your image looks like
off to one side of the screen at an angle. Place the projector directly in
front of the center of the screen, facing the screen squarely. If you can't
move the projector, use the horizontal slider on the projector to correct
the image.
6
Your projector automatically adjusts images that look like
but if necessary you can press the
correct it.
Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Turn projector
on and off
Access projector
menus
Turn off projector
display
For more information on using the remote control, see the online
User's Guide.
Project wirelessly
Follow the steps here to connect the projector wirelessly over an 802.11n,
802.11g, or 802.11b wireless network.
If you're projecting from a computer, it must have a wireless card or built-in
wireless interface, and be running Windows 8, Windows 7, Windows Vista
Windows XP Professional x64, or Windows XP, or Mac OS X 10.4.11 to 10.8.x.
or
, you may have placed the projector
or
or
button on the projector to
Choose which
source to display
Navigate projector
menus
Get solutions to
common problems
1
Remove the wireless LAN module cover screw.
2
Connect the wireless LAN module to the projector's USB-A (flat) port.
3
To configure your projector for your wireless network, do one of the
following:
•
If you're using the optional Quick Wireless Connection USB
key (Windows only, part number V12H005M09), press the LAN
button on the remote control. When you see SSID and IP address
information on the screen, remove the wireless LAN module
and connect the key to the projector's USB-A port. Look for the
displayed message, remove the key, and connect it to a USB port
on your computer. Follow the on-screen instructions to install
,
the driver, then run your presentation. For details, see the online
User's Guide.
•
If you're not using the key, continue with the steps below.
4
Attach the wireless LAN module cover and secure it using the screw
you removed.
5
Press the Menu button on the remote control, select the Network
menu, and press
6
Choose Network Configuration and press
7
Select the Wireless LAN menu and press
,
®
.
.
.