- ページ 12
ソフトウェア Epson PowerLite 1880のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Epson PowerLite 1880 47 ページ。 Operation guide - easymp monitor
Epson PowerLite 1880 にも： クイックセットアップ (4 ページ), 仕様 (6 ページ)
ページを印刷する
Connecting to a Projector on a Network and Projecting
Using the Connection Screen
Start EasyMP Network Projection to display the following screen. The
operation of each button or item is described in the following table.
A
Automatic search
You can search for available projectors on the network system
to which the computer is connected.
B
Manual search
You can search for a projector based on a specified IP address
or projector name.
C
Status
The following six icons indicate the status of the detected projectors.
Standby
Busy
Busy (Disable
interrupt
connection)
Currently in
use by
another
application
Searching
Not found.
D
Projector name
The projector's name is displayed.
E
Disable interrupt connection
Select this to prevent an interrupt connection by other computers
while connected to the selected projector.
F
Use multi-display
Select this when using the Multi-screen display function. When this is
selected, Display layout and Display properties are displayed at the
bottom of the screen.
s "Using Multi-Screen Display"
Available.
Available. When you click Connect,
the computer currently connected is
disconnected and your computer is
connected.
Cannot be selected. Disable
interrupt connection is set on
another computer which is already
connected.
The projector's Configuration menu is
open. You can select it after closing
the Configuration menu and running
the search again.
Displayed while running Manual
search or Profile.
Displayed when a projector cannot be
found as a result of Manual search or
Profile.
p.23
12