Using the control functions
The following table lists the control button functions.
Power On
Turns the projector power on.
Power Off
Turns the projector power off.
Switch source
Switches the video input source to the
Computer1
Computer1 port or Computer port.
Switch source
Switches the video input source to the
Computer2 port.
Switch source
Switches the video input source to the BNC
port.
Switch source
Switches the video input source to the
S-Video port.
Switch source
Switches the video input source to the Video
Video (RCA)
port or video2 port.
Switch source
Switches the video input source to the Video1
Video (BNC)
port.
Switch source
Switches the video input source to the DVI-D1
port or HDMI1 port.
If the projector is equipped with ether DVI-D
port or HDMI port, use this button to switch
the input signal.
DVI-D as an input source.
Switches the video input source to the DVI-D2
port or HDMI2 port.
If the projector is equipped with both DVI-D
port and HDMI port, use this button to select
HDMI as an input source.
Switch source
Switches the video input source to the D4
D-Video
port.
Switch source
Switches the input source to EasyMP or
EasyMP
EasyMP.net.
Switch source
Switches the input source to USB Display.
*
USB Display
Switch source
Switches the video input source to the
*
USB1
external equipment connected via a USB
(Type A) port or USB1.
Switch source
Switches the video input source to the
*
USB2
external equipment connected via a USB2
port.
Switch source
Switches the video input source to the image
*
LAN
projected by the computer via a network.
*
If the button does not function, you can switch the input source using the
button.
• Some connected projectors may not be equipped with all of the above ports
q
or functions. If you click a button for a port or function that is not
available, nothing will happen.
• You can select objects to be controlled and use the control buttons to carry
out control operations even when the following are being displayed.
p.31
Projector properties s
p.32
p.28
35
ページを印刷する