- ページ 2

ソフトウェア Epson PowerLite 1915のPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Epson PowerLite 1915 4 ページ。 Air filter and vent maintenance
Epson PowerLite 1915 にも：操作マニュアル (47 ページ), ユーザーマニュアル (1 ページ), パンフレット＆スペック (4 ページ), アップデート手順 (4 ページ), 適合宣言 (4 ページ), パーツリスト (1 ページ), ユーザーマニュアル (25 ページ), 更新マニュアル (8 ページ), ユーザーマニュアル (25 ページ), メンテナンス・マニュアル (3 ページ)

ページを印刷する

Turn on your equipment

Turn on your computer or video source.

Plug in the projector.

Open the A/V Mute slide all the way.

Press the

power button on the projector or remote control.

Power light

Power button

The power light flashes green, then stays on.

NOTE: To shut down the projector, press the

unplug it. You don't have to wait for the projector to cool down.

Adjust the image

If you don't see an image, press the Source Search button on the

projector or the remote control to select the image source.

NOTE: If you still see a blank screen or have other display problems, see

the troubleshooting tips on the back of this sheet.

To raise the image, press the gray foot release lever and lift the front of

the projector. Release the lever to lock the foot in position.

power button twice, then

Press the Focus buttons to sharpen the image.

Turn the zoom ring to reduce or enlarge the image.

Focus

Zoom

If your image looks like

one side of the screen at an angle. Place it directly in front of the center

of the screen, facing the screen squarely.

If your image looks like

projector to correct it.

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).

Turn projector

on and off

Turn off projector

display and sound

Change

presentation

slides (USB

connection only)

Navigate

projector

menus

You can use the remote control to operate the projector. With the USB cable,

you can use the remote as a wireless mouse. For more information on using

the remote control, see your User's Guide.

, you've placed the projector off to

, press the

buttons on the

Choose which

source to display

Control projector volume