ソフトウェア Epson PowerLite 475WのPDF インストレーション・ハンドブックをオンラインで閲覧またはダウンロードできます。Epson PowerLite 475W 4 ページ。 Maintenance
Epson PowerLite 475W にも：クイック・セットアップ・マニュアル (4 ページ), 操作マニュアル (50 ページ), 適合宣言 (4 ページ), クイック・セットアップ・マニュアル (4 ページ), 仕様 (6 ページ)

Epson PowerLite 470 / 475W / 480 / 485W

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted on the wall or ceiling.

1. Turn off the projector and unplug the power cord.

2. Allow the projector lamp to cool down for at least one hour.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful

removing any broken glass to avoid injury. If the projector is mounted on the wall or ceiling, stand to

the side in case the lamp is broken.

3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp

cover.

4. Slide off the lamp cover.

INSTALLATION HANDBOOK

Maintenance