- ページ 29

ソフトウェア Epson PowerLite 4855WUのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Epson PowerLite 4855WU 47 ページ。 Remote control information
Epson PowerLite 4855WU にも：操作マニュアル (48 ページ), クイック・リファレンス・カード (7 ページ), 製品仕様 (6 ページ), 適合宣言 (4 ページ), インストレーション・ハンドブック (3 ページ), クイック・リファレンス・マニュアル (4 ページ), 機能マニュアル (2 ページ), クイック・リファレンス (6 ページ)

Solving Problems

See the following sections to check for solutions to problems you may have using EasyMP Network

Updater.

Solving Problems When Updating

Error Message List

Error Status

Solving Network Connection Problems

Try these solutions depending on your network environment.

Parent topic:

Solutions When You Cannot Find Connected Projectors (Wired)

When you cannot connect the projector over a network using a wired connection, try the following

solutions. If you cannot resolve the problem, contact your network administrator.

• Check the status of the external devices used for the network connection or the projector's setting

environment.

• Connect the network cable securely.

Note:

• Use a commercially available 100BASE-TX or 10BASE-T LAN cable.

• To prevent malfunctions, use a category 5 or higher shielded LAN cable.

• Check the projector's network settings.

• Set DHCP to Off. When DHCP is set to On, it may take some time to enter LAN standby status if an

available DHCP server is not found.

Go to Network > Network Configuration > Wired LAN > DHCP or Network > Network

Configuration > Wired LAN > IP Settings > DHCP.

• Set the IP address, the subnet mask, and the gateway address for the projector correctly.

• Close network settings on the projector, and then return to the LAN standby screen.

Solving Problems