- ページ 20

ソフトウェア Epson PowerLite 737cのPDF 製品情報をオンラインで閲覧またはダウンロードできます。Epson PowerLite 737c 24 ページ。 Release of check tool for network projectors v1.00 for windows
Epson PowerLite 737c にも： ユーザーマニュアル (42 ページ), 操作マニュアル (36 ページ), クイック・セットアップ・マニュアル (2 ページ), 操作マニュアル (47 ページ), パーツリスト (1 ページ), 製品サポート速報 (30 ページ), インストレーション・マニュアル (19 ページ), ユーザーマニュアル (1 ページ), 製品サポート速報 (25 ページ), 製品サポート速報 (38 ページ), 製品サポート速報 (12 ページ), 製品サポート速報 (42 ページ), 製品サポート速報 (22 ページ), 製品サポート速報 (28 ページ), 製品サポート速報 (41 ページ), 製品サポート速報 (34 ページ), 製品サポート速報 (38 ページ), 製品サポート速報 (28 ページ), 製品サポート速報 (15 ページ), 製品サポート速報 (22 ページ), クイックセットアップ (2 ページ)

ページを印刷する
Epson PowerLite 737c 製品情報
Epson PowerLite 737c Projector
Controlling Your Projectors
The control buttons in the upper-right of the EMP Monitor
screen let you turn the projectors on and off and select video
signals. (Hold the mouse pointer over a button to see a
description of its meaning.) Select the projector you want to
operate (with the mouse pointer) before clicking one of the
buttons.
If you need the most current status information about your
projectors, click the
Refresh
Note:
To turn on a projector when it's in standby mode (plugged in but
not projecting), first select
Network ON
setting in the projector's Extended menu.
Configuring the Monitoring Interval
You can select how often EMP Monitor checks the
projector status:
1. From the Tool menu, select
screen.
Note:
If you want EMP Monitor to run whenever you start your
computer, click
Add to Startup
2. Select the desired update interval and click
20
Epson PowerLite 737c Projector
-
Control buttons
button.
as the
Standby Mode
. You see this
Configuration
.
.
OK
Understanding the Notification Messages
If a projector experiences a problem, it can send an e-mail
message to each of the addresses you provided using EMP
NetworkManager. The message includes the heading "Epson
Projector" in the subject line. The body of the message
contains the name of the projector, the projector's IP address,
and a description of the problem. The problem descriptions
are similar to the errors reported by EMP Monitor listed on
page 19.
If a plus (+) sign appears before the description, it indicates
that a problem has occurred. A minus (–) sign appears when
the problem is resolved.
Note:
If a projector develops a critical problem, it may not be possible for
it to report the error.

Projector Status Lights

The lights on top of the projector indicate the projector's status
and let you know when a problem occurs.
Power light
Lamp light
Temperature
light
Power
Lamp
Temperature
light
light
light
Flashing
Off
Off
green
Green
Off
Off
Flashing
Off
Off
orange
Red
Flashing
Flashing red
red
Red
Off
Flashing red
2/05
Description
The projector is warming up.
Wait for the image to appear.
The projector is operating
normally.
The projector is cooling
down. Wait for the light to
stop flashing and remain
orange before unplugging it.
There is an internal error in
the projector. Turn off the
projector and unplug it.
Contact Epson for help.
There is a problem with the
fan or a sensor. Turn off the
projector and unplug it.
Contact Epson for help.