EPSON PowerLite 7850p Projector
Note: The image will be slightly shorter after adjusting. If it's
important to maintain the correct aspect ratio, use the menu
system to perform keystone correction, as described below,
then adjust the Height setting as needed.
❏ Press the
button on the remote control, select the
Menu
menu, and press
Setting
select
in the Keystone menu and press
H/V-Keystone
. Select
Enter
V-Keystone
or
(for horizontal keystone distortion) and
H-Keystone
press
. Use the
Enter
control to adjust the keystone setting as needed.
Using Quick Corner
Use Quick Corner to correct the image shape when it's
uneven on all sides.
1. Press the
button on the remote control (or on the
Menu
projector's control panel).
2. Select the
menu and press
Setting
3. From the Setting menu, select
4. Select
and press
Quick Corner
You see this screen:
5. Press the
button to
Enter
select the corner you want to
adjust.
6. Use the
pointer button on
the remote control (or the
arrow buttons on the
projector) to adjust the shape.
7. Repeat steps 5 and 6 as needed
to adjust any remaining
corners.
8. When done, press the
exit the menu system.
If
remains selected in the Keystone menu, the
Quick Corner
Quick Corner screen appears whenever you press the
projector's
buttons. You can then follow steps 5
Keystone
through 8 above to correct the shape of your image, or press
to exit Quick Corner.
ESC
8
EPSON PowerLite 7850p Projector
-
. From the Setting menu,
Enter
(for vertical keystone distortion)
pointer button on the remote
.
Enter
and press
Keystone
.
Enter
[
]:Adjust
Adjust
/
[
[
]
]
:Move next
:Move next
[ESC] :Return (Press 1 second to
[ESC]
:Return (Press 1 second to
reset)
reset)
button on the remote control to
ESC
Correcting Computer Images
If you've connected a
computer and the image
doesn't look right or fit
properly on the screen, press
the
button on the
Auto
remote control (or the
Auto/Enter
projector's control panel).
This automatically resets the projector's tracking, sync,
resolution, and position settings.
Note: You must be projecting an image for this button to have
any effect. The
If vertical stripes appear in the projected image and the
button doesn't correct the problem, hold down the
button on the projector's control panel while pressing either
the
Tracking +
.
Enter
If the image appears fuzzy or flickers and the
doesn't correct the problem, hold down the
pressing either the
Note: Also make sure you have selected the correct Computer or
BNC Input option in the Setting menu for your computer. See the
User's Guide for more information.
6/03
button on the
button works only with computer images.
Auto
or the
button.
Tracking –
or
button.
Sync +
Sync –
Auto
button
Auto
Shift
button
Auto
button while
Shift
ページを印刷する