The projector beeps once and the
the projector warms up, then an image begins to appear. When
the
light stops flashing and remains green, the projector
Power
is ready for use.
Warning:
Never look into the lens when the lamp is on. This can damage your
eyes, and is especially dangerous for children.
❏ If you've connected a Windows
projector, you may see a message that your computer has
found a plug-and-play monitor; if so, click
❏ If you don't see the image you want, press the
button on the projector or the
Search
the remote control until you see the image you want to
project. Then press the
other device.
❏ If you are prompted to enter a password, see the
User's Guide.
Note:
You can also use the Source buttons on the remote control to switch
between devices connected to the ports identified on each button.
If a projected image fails to appear, see "You Can't Project an
Image" below.
When you're done projecting, turn off the projector as
described on page 6. Shutting down the projector correctly
prevents premature lamp failure and possible damage from
overheating.
You Can't Project an Image
If you don't see the image you are trying to project, try the
following:
❏ Make sure the cables are connected correctly.
❏ Make sure the
light is green and not flashing and the
Power
lens cap is off.
❏ If you've connected more than one computer and/or video
source, you may need to press the
on the projector's control panel or the
the remote control to select the correct source. (Allow a few
seconds for the projector to sync up after pressing the
button.)
❏ If you're using a notebook PC, see the next section.
light flashes green as
Power
®
-based computer to the
Cancel
Source
button on
Search
button on your DVD player or
Play
Source Search
button on
Search
The Projector and Notebook Don't
Display the Same Image
If you're projecting from a notebook, and you can't see your
image on the projection screen and on your notebook at the
same time, follow these guidelines.
If you're using a notebook PC with Windows:
❏ On most notebooks, there's a function key that lets you
toggle between the LCD screen and the projector, or display
on both at the same time. It may be labeled
.
have an icon such as
the
key while pressing it. Allow a few seconds for the
Fn
projector to sync up after changing the setting.
❏ If the function key doesn't permit you to display
simultaneously on both screens, you should check your
monitor settings to make sure both the LCD screen and the
external monitor port are enabled.
From the Control Panel, open the
Display Properties dialog box, click the
click
Advanced
varies by brand; you may need to click a
make sure the external Monitor port is set as your primary
display and/or enabled. See your computer's documentation
or online help for details.
If you're using a Macintosh
You may need to set up your notebook to display on the
projector screen as well as the LCD screen. Follow these steps:
1. From the Apple menu, select
click
Displays.
2. Select
VGA Display
Arrangement
If you're using a Macintosh with OS 8.6 to 9.x:
You may need to set up your notebook to display on the
projector screen as well as the LCD screen. Follow these steps:
button
1. From the Apple menu, select
Monitors
2. Click the
3. Drag one monitor icon on top of the other.
If the
Arrange
Simulscan resolution settings. Click the
necessary, and then select a
seconds for the projector to sync up after making the selection.)
9/05
Epson PowerLite 62c/82c Projector
. You may have to hold down
Display
. The method for adjusting the settings
®
with OS X:
System Preferences
or
, click
Color LCD
, and make sure
Mirror Displays
Control Panels
or
Monitors and Sound.
icon.
Arrange
option isn't available, try selecting one of the
Monitor
resolution. (Allow a few
Simulscan
Epson PowerLite 62c/82c Projector
or
CRT/LCD
utility. In the
tab, then
Settings
tab, then
Monitor
, then
or
Arrange
is checked.
, then click
icon, if
5
-
ページを印刷する