- ページ 6

ソフトウェア Epson PowerLite 915WのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Epson PowerLite 915W 25 ページ。 Powerlite 905; powerlite 915w
Epson PowerLite 915W にも：クイックセットアップ (4 ページ), 製品サポート速報 (5 ページ), パンフレット (4 ページ), 操作マニュアル (50 ページ), 適合宣言 (4 ページ), パンフレット (4 ページ), パンフレット＆スペック (4 ページ), クイックセットアップ (4 ページ)

ESC/VP21 Command User's Guide for Business Projectors

5. Command transmission timing

5.1. Standby state

1). For all mode with the standby configuration of "network on"

The first command can be sent anytime and the subsequent commands should be sent after receiving a colon from the

projector.

2). Other than 1)

PWR ON can be sent any time.

5.2. Power on state

A command should be sent after receiving the colon of the previous command from the projector. The following is an

exception. When the PWR OFF command is sent to 7800/7850/8300/9300 with the standby configuration of "network off",

the subsequent command should be sent 10 seconds after the colon is received.

In case that you can not wait for the colon and send a command after receiving it, instead send a command after the

execution time listed in the following table.