- ページ 14
テレビ Toshiba 19S1400 SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba 19S1400 Series 27 ページ。 Led tv
ページを印刷する
Adjusting the Colour Temperature
Colour Temperature increases the warmth or coolness
of the picture by setting the red, green or blue tint.
Use the menus: PICTURE and Picture Settings
Use the items: Colour Temperature, Red Level,
Green Level and Blue Level
Use the modes: Cool, Natural and Warm.
Resetting the Colour Temperature
Use the menus: PICTURE, Picture Settings and
Colour Temperature
Use the item: Reset (select YES and press OK)
Resetting the Picture Settings
Use the menus: PICTURE and Picture Settings
Use the item: Reset (select YES and press OK)
Activating the Noise Reduction (NR)
If the receiving signal of MPEG is a mosquito (grained)
noise depending on the compression and conversion,
the picture is weak and the picture is blurry, the picture
may be improved when using this function.
Use the menus: PICTURE, Picture Settings and
Noise Reduction
Use the items: Auto Clean, MPEG NR and DNR
Use the modes: Low, Middle, High and Off.
Adjusting the Colour Management
You can adjust the picture colour quality by selecting
from 6 base colour adjustments : Red, Green, Blue,
Yellow, Magenta or Cyan.
Use the menus: PICTURE, 3D Colour Management
(On) and Base Colour Adjustment
Use the items: Hue, Saturation and Brightness
Resetting the Base Colour Adjustment
Use the menus: PICTURE, 3D Colour Management
(On) and Base Colour Adjustment
Use the items: Reset
Using the Active Backlight Control
In order to improve screen visibility, the Active
Backlight Control sets the screen brightness
automatically during dark scenes
Use the menus: PICTURE
Use the item: Active Backlight Control
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
Auto mode
The MTS Auto mode automatically recognize stereo/
bilingual programmes depending on the broadcast
signal.
Mono mode
If you experience noise or poor reception of any stereo/
bilingual programme, set the MTS mode to Mono.
Noise will be reduced and reception may improve.
MTS
Note:
If you experience noise with a particular programme
on whose channel reception is usually good, try setting
MTS mode to Auto, then press
Mono (monaural).
Selecting the Dual 1 or Dual 2 mode
You can hear only Dual 1 or Dual 2 sound selected,
whenever bilingual programmes are received.
Use the menu: SOUND
Use the item: Dual
Notes:
When the MTS setting is in Mono mode, the Dual
menu is not selectable.
The Dual menu setting status remains even if the TV
is turned off .
Selecting the stereo programmes
When a stereo programme is received,
appears and press
Use modes: Stereo and Mono
Selecting the bilingual programmes
When a bilingual programme is received,
appears and press
Display
Dual 1
Dual 2
Mono
Note:
These settings are not stored in the TV memory.
Selecting the monaural programmes
If sound distortion, interruptions or silence arises in the
low sound volume level, setting the
will mitigate the problem.
When a monaural programme is received,
appears and press
Use the modes: Mono 1 and Mono 2
Note:
On some cases, the reception of stereo/bilingual
broadcasts may not be possible after switching on the
Mono 2 mode.
Adjusting the Sound Balance
Use the menu: SOUND and Balance
Use the button:
Using the Sound Mode
To use the
Press
to view the different modes available.
Choose your preferred Sound Mode.
- 14 -
SOUND
to switch to
.
.
Sound to be heard
German stereo/
NICAM
bilingual broadcast
Sub I sound
Main sound
Sub II sound
Sub sound
Main sound
.
and
buttom
Stereo
Dual
--
Mono 2 mode
Mono