- ページ 7

テレビ Toshiba 20A42のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba 20A42 37 ページ。 Toshiba color television owner's manual 20a42
Toshiba 20A42 にも：オーナーズマニュアル (19 ページ), サービスマニュアル (33 ページ), サービスマニュアル (36 ページ), オーナーズマニュアル (19 ページ)

ページを印刷する

ANTENNA/CATV CONNECTIONS

Combination VHF/UHF Antenna

Single 75 ohm Cable

300 ohm Twin-lead Wire

Take off the Splitter

Splitter

UHF Antenna

300 ohm Twin-lead Wire

VHF Antenna

Single 75 ohm Cable

300 ohm Twin-lead Wire

Incoming CATV

CONVERTER/ DESCRAMBLER

SPLITTER

A / B SWITCH

Combination VHF/UHF Antenna (Single 75 ohm cable or 300

ohm twin-lead wire)

Connect the 75 ohm cable from a combination VHF/UHF

antenna to the antenna jack.

If your combination antenna has a 300 ohm twin-lead wire, use

the 300-75 ohm matching transformer (not supplied).

Combination VHF/UHF Antenna (Separate VHF and UHF 300

ohm twin-leads)

Connect the UHF twin-lead wire to a combiner (not supplied).

Connect the VHF twin-lead to the 300-75 ohm matching

transformer (not supplied). Attach the transformer to the

combiner. Attach the combiner to the antenna jack.

CONNECTION TO OTHER EQUIPMENT

The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features

of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.

The connection diagrams in the following are offered as suggestions. You may need to modify them to accommodate your particular

assortment of components. The diagrams are intended to show component video and audio interconnections only.

TV/VIDEO SELECTION

If you connect the TV to a VCR, camcorder or TV game, you

can select by pressing TV/VIDEO.

Press TV/VIDEO repeatedly to select the desired

mode."VIDEO1" or "VIDEO2" will display on the screen for 4

seconds.

VIDEO 1

VIDEO 2

1. To connect the TV to a VCR

VCR

To Audio/

Video OUT

3L70101A-E COVER-P.07

300-75 OHM

MATCHING TRANSFORMER

(not supplied)

COMBINER

(not supplied)

300-75 OHM

MATCHING TRANSFORMER

(not supplied)

A B

VIDEO

Rear of TV

ANT.

VIDEO

AUDIO

AUDIO (R)

AUDIO (L)

(not supplied)

ANT.

VIDEO

AUDIO

Separate VHF/UHF Antennas

Connect the 75 ohm cable from the VHF antenna and the UHF

antenna twin-lead to a combiner (not supplied). Attach the

combiner to the antenna jack.

NOTE: If your VHF antenna has a twin-lead wire, use the 300-75

ohm matching transformer (not supplied), then connect the trans-

former to the combiner.

For Subscribers to Basic Cable TV Service

For basic cable service not requiring a converter/descrambler

box, connect the CATV 75 ohm coaxial cable directly to the

antenna jack on the back of the television.

For Subscribers to Scrambled Cable TV Service

If you subscribe to a cable service which requires the use of a

converter/descrambler box, connect the incoming cable to the

converter/descrambler box and connect the output of the box to

the antenna jack on the back of the television. Follow the

connections shown left. Set the television to the output of the

converter/descrambler box (usually channel 3 or 4) and use the

converter/descrambler box to select channels.

For Subscribers to Unscrambled Basic Cable with

Scrambled Premium Channels

If you subscribe to a cable service in which basic cable channels

are unscrambled and premium channels require the use of a

converter/descrambler box, you may wish to use a two-set signal

splitter (sometimes called a "two-set coupler") and an A/B switch

box from the cable installer or an electronics supply store. Follow

the connections shown left. With the switch in the "B" position, you

can directly tune any nonscrambled channels on your TV. With

the switch in the "A" position, tune your TV to the output of the

converter/descrambler box (usually channel 3 or 4) and use the

box to tune scrambled channels.

2. To connect the TV to a TV Game

The TV also can be used as a display device for many video

games. However, due to the wide variety of different types of

signal generated by these devices and subsequent hook-up

variations required, they have not all been included in the

suggested connection diagrams. You will need to consult each

component's Owner's Manual for additional information.

OUT

To Audio/Video

TV GAME

(not supplied)

3. To connect the TV to a camcorder

To playback from the camcorder, connect the camcorder to

the TV as shown.

To AV OUT jack

(not supplied)

5/6/02, 11:33 AM

This television has an

extended tuning range and

can tune most cable channels

without using a cable

company supplied converter

box. Some cable companies

offer "premium pay channels"

in which the signal is

scrambled. Descrambling

these signals for normal

viewing requires the use of a

descrambler device which is

generally provided by the

cable company.

Front of

Front of TV