- ページ 33
テレビ Toshiba 24 WL3A SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Toshiba 24 WL3A Series 38 ページ。
Toshiba 24 WL3A Series にも： クイック・スタート・マニュアル (9 ページ), 取扱説明書 (45 ページ)
ページを印刷する
If you carried out the setup after the first time instal-
lation you will return to the first screen of the setup
wizard when you press OK. In that case press Exit
or highlight Setup Later and press OK in order to
exit the setup.
Once the setup is complete, you will be able to control
the functions of your TV with Alexa.
Note: Make sure that the devices are connected to the internet.
Interacting with Alexa
To activate Alexa and make it listen what you are
saying, just say "Alexa". You can also press and
hold the Language button on the remote for about 3
seconds to do that. When Alexa is activated its logo
will appear on the lower right corner of the TV screen.
You can press the Exit button on your TV remote to
end the Alexa's response to your request.
Press and hold the Mute button on the remote for
about 3 seconds to turn off the microphones. Press
and hold the button again to turn on the microphones.
Standby LED Status
The embedded microphone will affect the Standby Led
status of your TV as follows:
Microphone
TV Power State
State
Off/Standby
Off
On
On
On
Off
Off/Standby
On
Example Commands
Here are some voice commands that you can use to
control the functions of your TV with Alexa:
Command
Alexa, turn on 'FN'
Alexa, turn off 'FN'
Alexa, play 'FN'
Alexa, pause 'FN'
Alexa, resume 'FN'
Alexa, stop 'FN'
Alexa, fast forward on 'FN'
Alexa, rewind on 'FN'
Alexa, set the volume of
'FN' to 50
Alexa, turn the volume up
on 'FN'
Alexa, turn the volume
down on 'FN'
Alexa, mute 'FN'
Standby LED
Status
Not lit
Green
Red
Red
Function
Powers on the TV
Powers off the TV
Starts media playback
Pauses media playback
Resumes media playback
Stops media playback
Advances media in fast
forward mode
Rewinds media
Sets the volume to the
specified level
Increases volume by 10
units
Decreases volume by
10 units
Mutes sound
English - 32 -
Command
Alexa, unmute 'FN'
Alexa, change the input to
"input_name" on 'FN'
Alexa, change channel to
"channel_number" on 'FN'
Alexa, change channel to
"channel_name" on 'FN'
Alexa, channel up on 'FN'
Alexa, channel down
on 'FN'
Alexa, next channel on
'FN'
FN is the abbreviation for 'Friendly Name'.
Function
Unmutes sound
The TV switches to the
input source with the spec-
ified name (e.g., HDMI 1)
The TV switches to the
channel with the specified
number (e.g., channel
200)
The TV switches to the
channel with the specified
name
The TV switches to the
next higher channel, if any
available
The TV switches to the
next lower channel, if any
available
The TV switches to the
next channel on the
channel list