- ページ 36

テレビ Toshiba 24 WM3C SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Toshiba 24 WM3C Series 50 ページ。
Toshiba 24 WM3C Series にも：取扱説明書 (50 ページ)

ページを印刷する

does not apply, when the TV is switched into the

standby mode.

The performance of some devices in the market,

may vary due to the software architecture. In order to

use Networked Standby Mode feature with a better

performance, please make sure that your device has

latest firmware version.

If you want your TV to consume less power in standby

mode, you can disable this feature by setting the

Networked Standby Mode option as Off.

Wireless Display (**)

Wireless Display is a standard for streaming video and

sound content. This feature provides the ability to use

your TV as wireless display device.

Using with mobile devices

There are different standards which enable sharing of

screens including graphical, video and audio content

between your mobile device and TV.

Plug the wireless USB dongle to TV first, if the TV

doesn't have internal WLAN feature.

Then press the Source button on the remote and

switch to Wireless Display source.

A screen appears stating that the TV is ready for

connection.

Open the sharing application on your mobile device.

These applications are named differently for each

brand, refer to the instruction manual of your mobile

device for detailed information.

Scan for devices. After you select your TV and connect,

the screen of your device will be displayed on your TV.

Note: This feature can be used only if the mobile device

supports this feature. If you experience problems with the

connection check if the operating system version you use

supports this feature. There may be incompatibility problems

with the operating system versions which are released after

the production of this TV. Scanning and connecting processes

differ according to the programme you use.

Connecting Bluetooth Devices (**)

Your TV supports Bluetooth wireless connection

technology too. A pairing is required before using

Bluetooth devices with the TV set. You should do the

following to pair your device with the TV:

• Set the device to pairing mode

• Start device discovery on the TV

Note: Refer to the user manual of the Bluetooth device to learn

how to set the device to pairing mode.

You can connect audio devices, keyboards and mice

to your TV using the Bluetooth wireless technology.

Unplug or switch off any other connected audio

device in order for wireless connection feature to

work correctly. For audio devices you should use

the Bluetooth option in the Settings>Sound menu,

for keyboards and mice the Bluetooth Input option

in the Settings>System>Device Settings menu.

Select the menu option and press the OK button to

open the related menu. Using this menu you can

discover and connect the devices that use Bluetooth

wireless technology and start to use them. Follow the

on-screen instructions. Start the device discovery. A

list of available Bluetooth devices will be displayed.

Select the device you want to connect from the list and

press the OK button to connect. If "Device connected"

message is displayed, the connection is successfully

established. If the connection fails try it again.

Note: Your TV may not be compatible with all keyboard and

mouse models in the market. For more information contact

your local dealer or retail outlet where you bought your TV.

Image transfer and audio streaming

You can also use this type of connection to transfer

images or stream audio from your mobile device to

your TV.

Pair the mobile device and the TV as described before.

Start a device search in your hand-held device. Select

your TV from listed devices. Confirm the request for

connection on your TV screen and do the same on

your hand held device screen. If no pairing is done,

image transfer or audio streaming to the TV will not

be possible.

The images sent by mobile device will be displayed

on the TV without confirmation request, if the image

file is suitable. You can also save the image file to a

connected USB memory drive or set as boot logo, if

this feature is supported and the file is suitable. Press

the Exit button to terminate displaying the image.

The audio will be routed through the speakers of

the TV, after confirmation is given. To start audio

streaming unpair the device from your TV if it is paired

with your TV previously. After pairing is completed, a

confirmation message will be displayed asking whether

you want to start audio streaming from your mobile

device. Select Yes and press the OK button on the

remote of the TV. If the connection is succeeded, all

audio will be routed through the speakers of the TV. A

symbol will appear on the upper side of the TV screen

as long as the audio streaming connection is active. To

terminate the audio streaming, you should turn off the

Bluetooth connection of your mobile device.

Close all running applications and all the menus on

the TV for a trouble-free transfer. Only image files with

sizes smaller than 5 MB and in the following file formats

are suitable; .jpg, .jpeg, .png, bmp. If a file sent by the

mobile device does not suit these requirements, it will

not be displayed on the TV.

If the Audio Video Sharing option in the Set-

tings>System>More menu is disabled, the TV will

ignore pairing requests and no information message

will be displayed on the screen. If a device is already

paired prior to disabling the Audio Video Sharing

English - 35 -

(**) Limited Models Only