Using the Remote Control

Make sure batteries are installed. Follow

these tips for using the remote control:

Point the remote control at the front of the projector or at the

screen.

Stand within 49 feet (15 meters) of the projector.

Controlling the Picture and Sound

You can use the remote control to preview and select your picture

sources, temporarily turn o the picture and sound, freeze the action,

zoom in on the picture, and adjust the volume.

Switching Between Picture Sources

If your projector is connected to more than one computer and/or

video source, you can switch between the di erent sources:

The easiest way to select your source is to press the

on the remote control (or the

projector) repeatedly until you see the image you want on the

screen.

On the remote control, you can press one of the

to select the connected device you need.

After you select a source, the screen goes dark for a moment before the

image appears.

INSTALLATION HANDBOOK

button on the

Source Search

Source

Remote Control Information

button

buttons