- ページ 8

ソフトウェア Epson PowerRIP StylusのPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。Epson PowerRIP Stylus 44 ページ。 Macintosh & macintosh power pc version 3.1 for stylus color/pro/pro xl

ページを印刷する

Registering PowerRIP

PowerRIP must be registered before using. To register your copy of PowerRIP:

1. Insert the diskette labeled Key Disk.

2. Double click on the BirmyRegister icon and the following menu will appear.

3. Call the Birmy Fulfillment Center at 800-613-3031 (24 hours a day, seven

days a week). You will be asked for your Serial Number, Printer Code, and

the model of your Stylus. (Stylus Color, Stylus Pro, or Stylus Pro XL.)

4. The Fulfillment Center will give you the required response number. Type that

number in the Fulfillment Response box on the Birmy Registration menu.

Before clicking on Register, record the number for future use. Fulfillment

Quick Start

Make backup copies of all installation disks

Connecting Stylus To Your Mac Via Serial Port

Install your Stylus per the manufacturer's instructions. Your EPSON Stylus should

be plugged into the printer port if you have a stand-alone Macintosh. You will have

to disable LocalTalk in this case. To disable LocalTalk, go to the Network Control

Panel and select Remote Only.

If you have multiple Mats that are on an AppleTalk network, your EPSON Stylus

must be plugged into the modem port. If you are using modem software, it must be

disabled.

Connecting Stylus To Your Mac Via EPSON's Optional AppleTalk/Ethertalk

Interface Card

Follow the instructions in the EPSON User's Guide for installation, networking

and naming your printer.

(for stand-alone or server Macintosh computers)

Birmy Graphics Corporation

In troductions/Installa tion

Response: -J

Your Serial Number

Your Printer Code