- ページ 15
テレビ Toshiba ZH36 SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba ZH36 Series 20 ページ。 Toshiba colour television zh36/37 owner's manual
ページを印刷するThe timer, time display, panel lock
and stereo/bilingual transmissions
The Timer
The TV can be set to turn itself On or Off after a
certain time.
Press MENU and S or R to select the Timer menu.
1
Timer
Off timer
On timer
On programme
EXIT To Exit
fe
Select
Use keys 0-9 to set the time
Press Q to select On or Off timer. Use the
2
number buttons to set the required time. For
example, to switch the TV off in one and a half
hours enter 01:30.
If setting the Off timer, press EXIT to finish. If
3
setting the On timer, press Q to select On
programme, enter the programme position
number required, then press
Standby. The GREEN On timer indicator on the
front of the TV will now be lit.
Any equipment connected with Scart leads must
also be put into Standby to prevent them from
being displayed when the timer switches on.
Once the On timer has been set the TV can be
switched on at any time by pressing
Green On timer indicator will remain on until the
set time period as passed when the TV will go to
the chosen channel. This feature can help to
avoid missing favourite programmes.
To cancel the On timer, enter zero in each
4
position including the programme position.
The Time Display
The time display facility allows the current time to be seen
on the TV screen.
/
Press
whilst watching a normal TV broadcast to
8
9
see a time display from the broadcaster. It will remain on
screen for about 5 seconds.
00 : 00
00 : 00
1
z x
Adjust
i
to put the TV into
. The
i
15
Panel lock
Panel Lock disables the buttons on the front of the TV.
All buttons on the remote control can still be used.
From the Feature menu select Panel Lock and
1
choose On or Off using S or R .
Feature menu
EXT2 Input
EXT2 Output
Horizontal Position
Width
Vertical Position
Height
Panel Lock
Automatic Format
Blue Screen
EXIT To Exit
fe
Select
When Panel Lock is ON, a reminder will appear
when any of the front panel buttons are pressed.
Once the set has been switched off it can
ONLY be brought out of standby using the
remote control.
Stereo and Bilingual transmissions
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a
few seconds. If the broadcast is not in stereo the word
Mono will appear.
Stereo... Press
to select Stereo or Mono.
I/II
O
Bilingual... Bilingual transmissions are rare. If they are
transmitted the word Dual will display. Choose the
required programme number and if the word Dual
appears press
to select Sound A, Sound B or
I/II
O
Mono.
z
Video
x
z
EXT1
x
z x
z x
z x
z x
z
On
x
z
Off
x
z
On
x
Adjust
z x