- ページ 18
マザーボード MSI 661FM3-V SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。MSI 661FM3-V Series 30 ページ。 661fm3 series
5. Lift the load lever up and open the
load plate.
7. Visually ins pect if the CPU is
seated well into the socket. If not,
take out the CPU with purely verti-
cal motion and reload it again. Then
c over t he l oad plat e on to t he
package.
9. Align the holes on the mainboard
with the cooler. Push down the
c ool er until its f our c lips get
wedg ed into the h oles of the
mainboard.
Hardware Setup
6. After confirming the CPU direction for
correction mating, put down the CPU
in the socket housing frame. Be sure
to grape on the edge of the substrate.
Note that the alignment keys are
matched.
alignment
key
8. Press down the load lever lightly
onto the load plate, and then se-
cure the lever with the hook under
retention tab.
10. Press the four hooks down to fas-
ten the cooler. Then rotate the lock-
ing switch (refer to the correct di-
rection marked on it) to lock the
hooks.
locking
switch
2-5