- ページ 6

ソフトウェア Epson Stylus Color 900のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Epson Stylus Color 900 40 ページ。 For windows and macintosh
Epson Stylus Color 900 にも：仕様 (2 ページ), スタート・ヒア・マニュアル (12 ページ), 製品サポート速報 (6 ページ), 製品サポート速報 (1 ページ), 製品情報マニュアル (13 ページ), 製品情報シート (4 ページ), 製品サポート速報 (3 ページ), 製品サポート速報 (2 ページ), 製品サポート速報 (4 ページ), 製品サポート速報 (7 ページ), オンラインマニュアル (12 ページ)

I/F (interface) mode

You may need to change the I/F mode so that your printer and

computer can communicate properly. If you select Auto, the printer

automatically selects the interface that is receiving data, and uses that

interface until the end of the print job. This setting allows you to share

the printer among multiple computers without changing the

interface mode.

Check your computer documentation if you are not sure of the type

of interface your computer requires.

Auto I/F (interface) wait time

If you select Auto as the I/F mode option, you can set the interface

timeout to 10 seconds or 30 seconds. The printer does not accept data

from another interface unless it receives no data from the current

interface for the period set in Auto I/F wait time.

Software

Use this setting to specify the type of control codes you want to use

to control the printer. If you select ESC/P 2, the printer emulates an

EPSON ESC/P 2 printer. If you select IBM X24E, the printer operates

as an IBM Proprinter™ X24E. If possible, select EPSON ESC/P 2 in

your application programs. This will allow you to use the most

advanced font and graphics handling available.

Auto CR

This feature is available when you select IBM X24E emulation as the

Software setting. When Auto CR is on, the auto carriage return option

performs a carriage-return line-feed (CR LF) operation whenever the

print position exceeds the right margin. If this is off, the printer does

not print characters beyond the right margin, and does not perform

a linewrap until it receives a CR command.

AGM (Alternate Graphics Mode)

This feature is available when you select IBM X24E emulation as the

Software setting. When AGM is on, the printer can use high-

resolution 24-pin graphics commands. The default is off.