- ページ 10

ソフトウェア Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print EngineのPDF 製品情報をオンラインで閲覧またはダウンロードできます。Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine 17 ページ。 Product support bulletin
Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine にも：パンフレット＆スペック (8 ページ), 仕様書 (8 ページ), クイック・インストール・マニュアル (34 ページ), クイック・リファレンス (10 ページ), 仕様 (4 ページ), 製品サポート速報 (44 ページ), 組立・セットアップマニュアル (14 ページ)

EPSON Stylus Pro 10600

Replacing Ink Cartridges

See page 3 for ink cartridge part numbers.

When one of the

lights is flashing (and

Ink Out

displayed on the control panel), the corresponding cartridge is

almost out of ink. Make sure you have a replacement

cartridge.

Ink Out

lights

When the light stays on and

cartridge is empty. You must replace it before you can

continue printing.

Before you start, make sure the printer is turned on. Then

follow these steps:

1. Note the color of the

Ink Out

This is the cartridge that you need to replace.

2. Push the indentation on the ink compartment cover to

release the lock and open the cover.

appears on the display.

6. Hold the ink cartridge with the arrow mark on the left side

and pointing toward the printer. Then insert the ink

cartridge into the slot. Don't force the cartridge.

10 - EPSON Stylus Pro 10600

INK LOW

is displayed, the

INK OUT

light that is on or flashing.

INK COMPART. OPEN

3. Locate the slot containing the empty ink cartridge

(corresponding to the

top of the clamp and pull it forward.

4. Carefully pull the empty cartridge straight out of the

printer.

5. Make sure the replacement cartridge is the correct color,

and remove it from its package.

If you're using Archival ink or UltraChrome ink, shake the

cartridge gently before installing it.

9/02

light). Press down on the

INK OUT