- ページ 10

ソフトウェア Epson Stylus Pro 4800 Portrait EditionのPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Epson Stylus Pro 4800 Portrait Edition 15 ページ。 Stylus pro 800 series
Epson Stylus Pro 4800 Portrait Edition にも：パンフレット＆スペック (8 ページ), スタートマニュアル (10 ページ), マニュアル (17 ページ), 重要なお知らせ (2 ページ), クイック・リファレンス・マニュアル (12 ページ), 限定保証 (12 ページ), パンフレット＆スペック (6 ページ), インストレーション・マニュアル (4 ページ), パンフレット＆スペック (16 ページ)

ページを印刷する

Epson Stylus Pro 4800 Portrait Edition セットアップマニュアル

3. Lift up the paper tray cover, and then pull the

paper guide roller up.

4. Raise the paper guide, and then slide the edge

guide to the left slightly wider than the width

of your paper.

5. Fan a stack of paper, and then tap it on a flat

surface to even the edges.

If the paper is curled, flatten it before you load

it. If it curls excessively and jams frequently,

stop using it.

6. Clean the inside of the tray to remove any

dust. Dust may decrease the printout quality.

7. Load the sheets with the printable side facing

down and the right edge of the paper resting

against the right side of the paper tray.

Note:

❏ Always set the paper's short edge first.

❏ Make sure the sheets lie flat on the bottom of

the tray, and put the edge of the paper against

the right inner corner of the paper tray;

otherwise, printing may become misaligned.

❏ The loadable capacity of paper in the paper tray

differs depending on the media and its size.

The paper tray can hold up to 250-sheets of

17 lb or 64 g/m² plain paper. Do not load the

paper above the arrow mark on the inside

surface of the left edge guide.

For information on the loadable capacity of

Epson special media, see the following table.

Epson special

Size

media

Premium

Semigloss Photo

LTR

Paper

Super

A3/B

Premium Luster

LTR

Photo Paper

Super

A3/B

Photo Quality Ink

Jet Paper

LTR

EPSON Proofing

Super

Paper Semimatte

A3/B

(Commercial)

Loadable

capacity in the

paper tray

100

200