- ページ 21

オール・イン・ワン・プリンター Toshiba e-studio 3508aのPDF 安全情報マニュアルをオンラインで閲覧またはダウンロードできます。Toshiba e-studio 3508a 25 ページ。 Multifunctional digital color systems

Other points

 Be very careful to treat the touch panel gently and never hit it. Breaking the surface could cause

malfunctions.

 Do not turn the power OFF with misfed paper remaining inside the equipment.

This could cause a malfunction when the power is turned ON next time.

 Be sure to turn the power OFF when leaving the office or if there is a power outage. However, do not

turn the power OFF if the weekly timer is in use.

 Be careful because the paper exit area and paper just after exiting are hot.

 Do not place anything other than paper on the receiving tray. This could disturb a normal operation

and cause malfunctions.

 Do not touch the photoconductive drum, transfer belt and 2nd transfer roller. This could cause

image problems.

 Do not open/close the covers and the bypass tray, or pull out the drawers during printing.

 During maintenance or inspection

 Never attempt to repair, disassemble or modify the Multifunctional Digital Systems by yourself. You

could cause a fire or get an electric shock.

Always contact your Service representative for maintenance or repair of the internal parts of the

Multifunctional Digital Systems.

 Do not let liquids such as water and oil get into the system when cleaning the floor. This could cause

a fire and give you an electric shock.

 Always keep the plug and outlet clean. Prevent them from accumulating dust and dirt. This could

cause a fire and give you an electric shock due to the heat released by electric leakage.

 Do not touch the stapling area. The actual needle point could cause you personal injury.

Other points

 Do not use such solvents as thinner or alcohol when cleaning the surface of the Multifunctional

Digital Systems.

- This could warp the shape of the surface or leave it discolored.

- When using a chemical cleaning pad to clean it, pay attention to any cautionary points.

 Repair parts will be provided for a period of 7 years after the final manufacturing of the product.

 The life of each consumable differs depending not only on the copy/print volume but also on other

factors (operating time, output image, media type and so on). Due to this, the life cannot be

specified in a simple description using the copy/print volume. For more details, contact your

supplier where you purchased the product.

 When handling supplies

 Never attempt to incinerate toner cartridges and waste toner boxes. Dispose of used toner

cartridges and waste toner boxes in accordance with local regulations.

Other points

 Read the operator's manual carefully to replace the toner cartridge using the correct procedure. An

improper procedure could cause toner leakage or scattering.

Safety Information 21