- ページ 9

デスクトップ MSI 700のPDF ハードウェアマニュアルをオンラインで閲覧またはダウンロードできます。MSI 700 30 ページ。 Msi axis 700: install guide

Power Switch

Connect to a 2-pin push button switch.

Reset switch is used to reboot the system rather than turning the power ON/

OFF. Avoid rebooting while the HDD LED is lit. You can connect the Reset

switch from the system case to this pin.

The Power LED is lit while the system power is on. Connect the Power LED

from the system case to this pin. There are two types of LED that you can

use: 3-pin single color LED or 2-pin dual color LED (ACPI request).

a. 3 pin single color LED connect to pin 4, 5, & 6. This LED will lit

when the system is on.

b. 2 pin dual color LED connect to pin 5 & 6.

GREEN Color:

ORANGE Color:

Speaker

Speaker from the system case is connected to this pin.

HDD LED shows the activity of a hard disk drive. Avoid turning the power

off while the HDD led is lit. You can connect the HDD LED from the system

case to this pin.

Indicate the system is in full on mode.

Indicate the system is in suspend mode.

2-9