- ページ 3
モニター Philips S line 222S1のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Philips S line 222S1 31 ページ。
Philips S line 222S1 にも： ユーザーマニュアル (31 ページ), ユーザーマニュアル (31 ページ)
ページを印刷する
1. Important
1. Important
This electronic user's guide is intended
for anyone who uses the Philips
monitor. Take time to read this user
manual before you use your monitor.
It contains important information and
notes regarding operating your monitor.
The Philips guarantee applies provided
the product is handled properly for
its intended use, in accordance with
its operating instructions and upon
presentation of the original invoice
or cash receipt, indicating the date of
purchase, dealer's name and model
and production number of the product.
1.1 Safety precautions and
maintenance
Warnings
Use of controls, adjustments or
procedures other than those specified
in this documentation may result in
exposure to shock, electrical hazards
and/or mechanical hazards.
Read and follow these instructions
when connecting and using your
computer monitor.
Excessive sound pressure from
earphones and headphones can
cause hearing loss. Adjustment of the
equalizer to maximum increases the
earphones and headphones output
voltage and therefore the sound
pressure level.
Operation
•
Please Keep the monitor out of
direct sunlight, very strong bright
lights and away from any other heat
source. Lengthy exposure to this
type of environment may result in
discoloration and damage to the
monitor.
•
Remove any object that could fall
into ventilation holes or prevent
proper cooling of the monitor's
electronics.
•
Do not block the ventilation holes
on the cabinet.
•
When positioning the monitor, make
sure the power plug and outlet are
easily accessible.
•
If turning off the monitor by
detaching the power cable or DC
power cord, wait for 6 seconds
before attaching the power cable
or DC power cord for normal
operation.
•
Please use approved power cord
provided by Philips all the time. If
your power cord is missing, please
contact with your local service
center. (Please refer to Service
contact information listed in
Important information manual.)
•
Operate under the specified power
supply. Be sure to operate the
monitor only with the specified
power supply. Use of an incorrect
voltage will cause malfunction and
may cause fire or electric shock.
•
Protect the cable. Do not pull or
bend the power cable and signal
cable. Do not place the monitor
or any other heavy objects on the
cables, if damaged, the cables may
cause fire or electric shock.
•
Do not subject the monitor to
severe vibration or high impact
conditions during operation.
•
Do not knock or drop the monitor
during operation or transportation.
Maintenance
•
To protect your monitor from
possible damage, do not put
excessive pressure on the LCD
panel. When moving your monitor,
grasp the frame to lift; do not lift
1