- ページ 31

モニター Philips WT121XESのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Philips WT121XES 36 ページ。 Applied rfid

14.0.0 PRECAUTIONS

14.1.0

The equipment should be installed near an easily accessible outlet.

Do not install or leave the monitor:

In places subject to extreme temperatures, for example near a radiator, heating vent, or in direct sunlight. Subjecting the

LCD monitor to extreme temperatures, could cause deformations of the casing or malfunctions.

In places subject to mechanical vibration or shock.

Near any equipment that generates a strong magnetic field, such as a TV or various other medical appliances.

In places subject to inordinate amounts of dust, dirt, or sand, for example near an open window or an outdoor exit.

If setting up temporarily in an outdoor environment, be sure to take adequate precautions against airborne dust and dirt.

Otherwise irreparable malfunctions could occur.

14.2.0

Do not press on or scratch the LCD screen. Do not place a heavy object on the LCD screen. This may cause the screen

to lose uniformity or cause LCD panel malfunctions.

If the monitor is used in a cold place, a residual image may appear in the screen. This is not a malfunction.

The screen returns to normal as the temperature rises to a normal operating level.

If a still picture is displayed for a long time, a residual image may appear for a while. The residual image will eventually

disappear.

The LCD panel becomes warm during operation. This is not a malfunction.

Allow adequate air circulation to reduce the LCD panel temperature (eg. on the desk keep it in the base station)

14.3.0

Be sure to unplug the power cord from the mains when cleaning your device.

The front polarizer can be easily damaged. Take care not to scratch the front surface with any hard or abrasive

material. Dust, finger marks, grease etc. can be removed with a soft damp cloth (a small amount of mild detergent can

be used on the damp cloth). Do not apply water or detergent directly to the front surface as this may cause staining

or damage the electronic components. Never use any solvent on the front polarizer or module as this may cause permanent

damage. Wipe off water drop immediately. Long contact with water may cause discoloration spots. When the panel surface

is soiled, wipe it with absorbent cotton or other soft cloth."

14.4.0

Disconnect all cables from the monitor when transporting.

When you transport this device, hold the base sections of the display stand firmly in both hands. If you drop the

device, you may be injured or the monitor may be damaged.

When you transport this device for repair or shipment, use the original cardboard box and packing materials.

WT11