- ページ 11

ステレオシステム Philips 3 CD CHANGER PRO LOGIC FWP73P37のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Philips 3 CD CHANGER PRO LOGIC FWP73P37 31 ページ。 Cd mini system
Philips 3 CD CHANGER PRO LOGIC FWP73P37 にも: 仕様 (2 ページ)

Philips 3 CD CHANGER PRO LOGIC FWP73P37 ユーザーマニュアル
11
7 Adjust the sound
of all the speakers
AUSE
TEST TONE
until they are equal.
Å
When you are
LUME
satisfied with the
É
setting, press
TEST TONE again to switch off
the test signal.
Note:
– It is advisable to set the speakers' level
at normal listening level. "XX" denotes
the sound level.
When you have completed the Dolby
Pro Logic setup, you are ready to enjoy
Home Cinema sound.
• Press DPL (PRO
LOGIC)
Ç
à
repeatedly to
select and cycle
DPL
through the
L
BALANCE
various sound
modes.
Dolby Surround ™ Center
Phantom ™ Dolby 3 Stereo ™
Stereo ™ Dolby Surround ...
™ The Dolby Pro Logic display panel
will light up with the selection.
DOLBY PRO LOGIC

Dolby Surround

This setting is for a full Dolby Surround
Pro Logic mode.
• Press DPL to select the Dolby
Surround mode.
™ The message
"DOLBY
C
SURROUND"
L
will be
PRO LOGIC
S
displayed.
™ The DPL
display panel
will light up.
Dolby Center Phantom
This setting is for use without the
center speaker. It redistributes the
á
center speaker sound to the left and
right speakers, providing conventional
stereo across the front.
R
• Press DPL to select the Dolby Pro
Logic Center Phantom mode.
™ The message
"CENTER
C
PHANTOM"
L
will be
PRO LOGIC
S
displayed.
™ The DPL
display panel
will light up.
Dolby 3 Stereo
Use this setting when full surround is
not required, but a wide stereo sound is
desired. It only requires the left, right
and center speakers.
• Press DPL to select the Dolby 3
Stereo mode.
™ The message
R
"DOLBY 3
C
S
STEREO" will
L
be displayed.
PRO LOGIC
S
™ The DPL
display panel
will light up.
Normal Stereo
This setting is for normal stereo sound
without Dolby Pro Logic. It only
requires the left and right speakers.
• Press DPL to select the Stereo
mode.
™ The message
"STEREO"
C
will be
L
displayed.
PRO LOGIC
R
S
™ The DPL
S
display panel
will light up.
Important!
1 For the best Dolby Pro Logic
sound, switch on DPL with DSC
set to "Classic".
2 Dolby Pro Logic mode will
automatically switch to normal
Stereo mode when headphones
are connected.
3 Switch to normal stereo mode
when you record on a tape.
R
S
R
S
3139 116 19511 ( ENG)